EPP7342-0002
EPP7342-0002 | 2-channel DC motor output stage 50 V DC, 3.5 A
The EPP7342 EtherCAT P Box enables direct operation of two DC motors. The speed or position is specified by the automation device via a 16-bit value. By connection of an incremental encoder (24 V DC, single-ended), a simple servo axis can be realised. The output stage is protected against overload and short-circuit. The EtherCAT P Box has two channels that indicate their signal state via light emitting diodes. The LEDs enable quick local diagnosis.
Number of outputs: | 2 |
Connection method: | M12, screw type |
Rated load voltage: | 8…50 V DC |
Load type: | DC brush motor, inductive |
Distributed clocks: | yes |
Protocol: | EtherCAT |
Bus interface: | 2 x M8 socket, shielded, screw type, P-coded |
Output current: | per channel max. 3.5 A (short-circuit proof, common thermal overload warning for both output stages) |
PWM clock frequency: | 32 kHz with 180° phase shift each |
Duty factor: | 0…100 % (voltage-controlled) |
Resolution: | max. 10 bit current, 16 bit speed |
Power supply connection: | not necessary |
Bit width in the process image: | 2 x 32 bit status, 2 x 32 bit control, 2 x 32 bit input, 2 x 32 bit output |
Electrical isolation: | 500 V |
Configuration: | adaptation and optimisation of the respective motor via the controller |
Current consumption sensor supply: | 20 mA (see documentation) |
Current consumption from US: | typ. 100 mA |
Special features: | travel distance control, encoder input |
Weight: | approx. 165 g |
Operating/storage temperature: | -25…+60 °C/-40…+85 °C |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 65/66/67 (conforms to EN 60529)/variable |
Approvals/markings: | CE, UL in preparation |
ТН ВЭД: | |
Страна происхождения: | |
EAN: | |
Вес: | 0,00 kg |
Длина: | 0,00 m |
Ширина: | 0,00 m |
Высота: | 0,00 m |