7760056336
DRI424024LD
Type: | DRI424024LD |
Order No.: | 7760056336 |
Version: | D-SERIES DRI, Relay, Number of contacts: 2, CO contact AgSnO, Rated control voltage: 24 V DC, Continuous current: 5 A, Flat blade connections (2.5 mm x 0.5 mm) |
GTIN (EAN): | 6944169739835 |
Qty.: | 20 pc(s). |
Width: | 13 mm |
Width (inches): | 0.512 inch |
Height: | 31 mm |
Height (inches): | 1.22 inch |
Depth: | 28 mm |
Depth (inches): | 1.102 inch |
Net weight: | 19.25 g |
Humidity: | 35...85 % rel. humidity, no condensation |
Operating temperature, max.: | 55 °C |
Operating temperature, min.: | -40 °C |
Storage temperature, max.: | 85 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -40 °C...55 °C |
Storage temperature: | -40 °C...85 °C |
REACH SVHC: | Lead 7439-92-1 |
Certificate No. (cURus): | E312083 |
Rated control voltage: | 24 V DC |
Rated current DC: | 21,8 mA |
Power rating: | 530 mW |
Pull-in/drop-out voltage, typ.: | 18 V / 3.6 V DC |
Coil resistance: | 1100 Ω ± 10 % |
Status indicator: | Green LED |
Protective circuit: | Free-wheeling diode |
Rated switching voltage: | 250 V AC |
Max. switching voltage, AC: | 250 V |
Max. switching voltage, DC: | 250 V |
Continuous current: | 5 A |
AC switching capacity (resistive), max.: | 1250 VA |
DC switching capacity (resistive), max.: | 150 W @ 24 V |
Switch-on delay: | ≤ 15 ms |
Switch-off delay: | ≤ 10 ms |
Min. switching power: | 10 mA @ 12 V, 100 mA @ 5 V |
Max. switching frequency at rated load: | 0.1 Hz |
Contact type: | 2 CO contact (AgSnO) |
Test button: | No |
Mechanical switch position indicator: | No |
Colour: | Transparent |
UL 94 flammability rating: | V-2 |
Rated voltage: | 300 V |
Surge voltage category: | III |
Pollution severity: | 2 |
Insulating material group: | IIIa |
Protection degree: | IP20 |
Creepage and clearance distance input – output: | ≥ 4 mm |
Impulse withstand voltage: | 5 kV (1.2/50 µs) |
Standards: | IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011, UL 508 |
Certificate No. (cURus): | E312083 |
Wire connection method: | Flat blade connections (2.5 mm x 0.5 mm) |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ROHS: | Conform |
Type: | DRI424024LD |
Order No.: | 7760056336 |
Version: | D-SERIES DRI, Relay, Number of contacts: 2, CO contact AgSnO, Rated control voltage: 24 V DC, Continuous current: 5 A, Flat blade connections (2.5 mm x 0.5 mm) |
GTIN (EAN): | 6944169739835 |
Qty.: | 20 pc(s). |
Width: | 13 mm |
Width (inches): | 0.512 inch |
Height: | 31 mm |
Height (inches): | 1.22 inch |
Depth: | 28 mm |
Depth (inches): | 1.102 inch |
Net weight: | 19.25 g |
Humidity: | 35...85 % rel. humidity, no condensation |
Operating temperature, max.: | 55 °C |
Operating temperature, min.: | -40 °C |
Storage temperature, max.: | 85 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -40 °C...55 °C |
Storage temperature: | -40 °C...85 °C |
REACH SVHC: | Lead 7439-92-1 |
Certificate No. (cURus): | E312083 |
Rated control voltage: | 24 V DC |
Rated current DC: | 21,8 mA |
Power rating: | 530 mW |
Pull-in/drop-out voltage, typ.: | 18 V / 3.6 V DC |
Coil resistance: | 1100 Ω ± 10 % |
Status indicator: | Green LED |
Protective circuit: | Free-wheeling diode |
Rated switching voltage: | 250 V AC |
Max. switching voltage, AC: | 250 V |
Max. switching voltage, DC: | 250 V |
Continuous current: | 5 A |
AC switching capacity (resistive), max.: | 1250 VA |
DC switching capacity (resistive), max.: | 150 W @ 24 V |
Switch-on delay: | ≤ 15 ms |
Switch-off delay: | ≤ 10 ms |
Min. switching power: | 10 mA @ 12 V, 100 mA @ 5 V |
Max. switching frequency at rated load: | 0.1 Hz |
Contact type: | 2 CO contact (AgSnO) |
Test button: | No |
Mechanical switch position indicator: | No |
Colour: | Transparent |
UL 94 flammability rating: | V-2 |
Rated voltage: | 300 V |
Surge voltage category: | III |
Pollution severity: | 2 |
Insulating material group: | IIIa |
Protection degree: | IP20 |
Creepage and clearance distance input – output: | ≥ 4 mm |
Impulse withstand voltage: | 5 kV (1.2/50 µs) |
Standards: | IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011, UL 508 |
Certificate No. (cURus): | E312083 |
Wire connection method: | Flat blade connections (2.5 mm x 0.5 mm) |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ROHS: | Conform |
ECCN: | |
Kraj pochodzenia: | |
EAN: | |
Waga: | 0,022 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |