2604090000
LSF-SMT 3.50/12/90 1.5SN BK RL SO
Type: | LSF-SMT 3.50/12/90 1.5SN BK RL SO |
Order No.: | 2604090000 |
Version: | Printed circuit board terminals, 3.50 mm, Number of poles: 12, 90°, Solder pin length (l): 1.5 mm, black, PUSH IN, Clamping range, max. : 1.5 mm², Tape |
GTIN (EAN): | 4050118615135 |
Qty.: | 265 pc(s). |
Packaging: | Tape |
Width: | 42.7 |
Width (inches): | 1.681 inch |
Height: | 11.15 mm |
Height (inches): | 0.439 inch |
Height of lowest version: | 9.65 mm |
Depth: | 14.75 mm |
Depth (inches): | 0.581 inch |
Net weight: | 6.14 g |
Product family: | OMNIMATE Signal - series LSF |
Wire connection method: | PUSH IN |
Mounting onto the PCB: | THT/THR solder connection |
Conductor outlet direction: | 90° |
Pitch in mm (P): | 3.5 mm |
Pitch in inches (P): | 0.138 inch |
Number of poles: | 12 |
Fitted by customer: | No |
Solder pin length (l): | 1.5 mm |
Solder pin length tolerance: | 0 / -0.3 mm |
Solder pin dimensions: | 0.35 x 0.8 mm |
Solder pin dimensions = d tolerance: | 0 / -0.1 mm |
Solder eyelet hole diameter (D): | 1.1 mm |
Solder eyelet hole diameter tolerance (D): | + 0,1 mm |
Number of solder pins per pole: | 2 |
Stripping length: | 8 mm |
L1 in mm: | 38.5 mm |
L1 in inches: | 1.518 inch |
Touch-safe protection acc. to DIN VDE 0470: | IP 20 |
Touch-safe protection acc. to DIN VDE 57 106: | Safe from finger touch |
Volume resistance: | 1.60 mΩ |
Insulating material: | LCP GF |
Colour: | black |
Colour of operational elements: | grey, black |
Material of operational elements: | PPA GF |
Colour chart (similar): | RAL 9011 |
Insulating material group: | IIIa |
Comparative Tracking Index (CTI): | ≥ 175 |
Moisture Level (MSL): | 1 |
UL 94 flammability rating: | V-0 |
Contact material: | Copper alloy |
Layer structure of solder connection: | 4...6 µm Sn matt |
Storage temperature, min.: | -25 °C |
Storage temperature, max.: | 50 °C |
Max. relative humidity during storage: | 70 % |
Operating temperature, min.: | -50 °C |
Operating temperature, max.: | 120 °C |
Temperature range, installation, min.: | -30 °C |
Temperature range, installation, max.: | 120 °C |
Clamping range, min.: | 0.13 mm² |
Clamping range, max.: | 1.5 mm² |
Wire connection cross section AWG, min.: | AWG 28 |
Wire connection cross section AWG, max.: | AWG 14 |
Solid, min. H05(07) V-U: | 0.2 mm² |
Solid, max. H05(07) V-U: | 1.5 mm² |
Flexible, min. H05(07) V-K: | 0.2 mm² |
Flexible, max. H05(07) V-K: | 1.5 mm² |
w. plastic collar ferrule, DIN 46228 pt 4, min.: | 0.25 mm² |
w. plastic collar ferrule, DIN 46228 pt 4, max.: | 0.75 mm² |
w. wire end ferrule, DIN 46228 pt 1, min.: | 0.25 mm² |
w. wire end ferrule, DIN 46228 pt 1, max.: | 1.5 mm² |
Type: | fine-wired |
nominal: | 0.25 mm² |
nominal: | 10 mm |
Type: | fine-wired |
nominal: | 0.34 mm² |
nominal: | 10 mm |
Type: | fine-wired |
nominal: | 0.5 mm² |
nominal: | 10 mm |
Type: | fine-wired |
nominal: | 0.75 mm² |
nominal: | 10 mm |
Type: | fine-wired |
nominal: | 1.5 mm² |
nominal: | 7 mm |
Reference text: | Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P) |
Max. clamping range: | 1.5 mm² |
tested acc. to standard: | IEC 60664-1, IEC 61984 |
Rated current, min. number of poles (Tu=20°C): | 17.5 A |
Rated current, max. number of poles (Tu=20°C): | 16 A |
Rated current, min. number of poles (Tu=40°C): | 17.5 A |
Rated current, max. number of poles (Tu=40°C): | 14 A |
Rated voltage for surge voltage class / pollution degree II/2: | 320 V |
Rated voltage for surge voltage class / pollution degree III/2: | 160 V |
Rated voltage for surge voltage class / pollution degree III/3: | 160 V |
Rated impulse voltage for surge voltage class/ pollution degree II/2: | 2.5 kV |
Rated impulse voltage for surge voltage class/ pollution degree III/2: | 2.5 kV |
Rated impulse voltage for surge voltage class/ contamination degree III/3: | 2.5 kV |
Short-time withstand current resistance: | 3 x 1s with 80 A |
Rated voltage (Use group B / CSA): | 300 V |
Rated voltage (Use group D / CSA): | 300 V |
Rated current (Use group B / CSA): | 10 A |
Rated current (Use group D / CSA): | 10 A |
Wire cross-section, AWG, min.: | AWG 28 |
Wire cross-section, AWG, max.: | AWG 14 |
Rated voltage (Use group B / UL 1059): | 300 V |
Rated voltage (Use group D / UL 1059): | 300 V |
Rated current (Use group B / UL 1059): | 12 A |
Rated current (Use group D / UL 1059): | 10 A |
Wire cross-section, AWG, min.: | AWG 28 |
Wire cross-section, AWG, max.: | AWG 14 |
Packaging: | Tape |
VPE length: | 0 |
VPE width: | 0 |
VPE height: | 0 |
Tape depth (T2): | 13 mm |
Tape width (W): | 56 mm |
Tape pocket depth (K0): | 12.5 mm |
Tape pocket height (A0): | 12.6 mm |
Tape pocket width (B0): | 43 mm |
Tape pocket separation (P1): | 20 mm |
Tape hole separation (E): | 1.75 mm |
Tape pocket separation (F): | 26.2 mm |
Tape reel diameter ∅ (A): | 330 mm |
ETIM 6.0: | EC002643 |
ETIM 7.0: | EC002643 |
eClass 9.0: | 27-44-04-01 |
eClass 9.1: | 27-44-04-01 |
eClass 10.0: | 27-44-04-01 |
IPC conformity: | Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. |
Type: | LSF-SMT 3.50/12/90 1.5SN BK RL SO |
Order No.: | 2604090000 |
Version: | Printed circuit board terminals, 3.50 mm, Number of poles: 12, 90°, Solder pin length (l): 1.5 mm, black, PUSH IN, Clamping range, max. : 1.5 mm², Tape |
GTIN (EAN): | 4050118615135 |
Qty.: | 265 pc(s). |
Packaging: | Tape |
Width: | 42.7 |
Width (inches): | 1.681 inch |
Height: | 11.15 mm |
Height (inches): | 0.439 inch |
Height of lowest version: | 9.65 mm |
Depth: | 14.75 mm |
Depth (inches): | 0.581 inch |
Net weight: | 6.14 g |
Product family: | OMNIMATE Signal - series LSF |
Wire connection method: | PUSH IN |
Mounting onto the PCB: | THT/THR solder connection |
Conductor outlet direction: | 90° |
Pitch in mm (P): | 3.5 mm |
Pitch in inches (P): | 0.138 inch |
Number of poles: | 12 |
Fitted by customer: | No |
Solder pin length (l): | 1.5 mm |
Solder pin length tolerance: | 0 / -0.3 mm |
Solder pin dimensions: | 0.35 x 0.8 mm |
Solder pin dimensions = d tolerance: | 0 / -0.1 mm |
Solder eyelet hole diameter (D): | 1.1 mm |
Solder eyelet hole diameter tolerance (D): | + 0,1 mm |
Number of solder pins per pole: | 2 |
Stripping length: | 8 mm |
L1 in mm: | 38.5 mm |
L1 in inches: | 1.518 inch |
Touch-safe protection acc. to DIN VDE 0470: | IP 20 |
Touch-safe protection acc. to DIN VDE 57 106: | Safe from finger touch |
Volume resistance: | 1.60 mΩ |
Insulating material: | LCP GF |
Colour: | black |
Colour of operational elements: | grey, black |
Material of operational elements: | PPA GF |
Colour chart (similar): | RAL 9011 |
Insulating material group: | IIIa |
Comparative Tracking Index (CTI): | ≥ 175 |
Moisture Level (MSL): | 1 |
UL 94 flammability rating: | V-0 |
Contact material: | Copper alloy |
Layer structure of solder connection: | 4...6 µm Sn matt |
Storage temperature, min.: | -25 °C |
Storage temperature, max.: | 50 °C |
Max. relative humidity during storage: | 70 % |
Operating temperature, min.: | -50 °C |
Operating temperature, max.: | 120 °C |
Temperature range, installation, min.: | -30 °C |
Temperature range, installation, max.: | 120 °C |
Clamping range, min.: | 0.13 mm² |
Clamping range, max.: | 1.5 mm² |
Wire connection cross section AWG, min.: | AWG 28 |
Wire connection cross section AWG, max.: | AWG 14 |
Solid, min. H05(07) V-U: | 0.2 mm² |
Solid, max. H05(07) V-U: | 1.5 mm² |
Flexible, min. H05(07) V-K: | 0.2 mm² |
Flexible, max. H05(07) V-K: | 1.5 mm² |
w. plastic collar ferrule, DIN 46228 pt 4, min.: | 0.25 mm² |
w. plastic collar ferrule, DIN 46228 pt 4, max.: | 0.75 mm² |
w. wire end ferrule, DIN 46228 pt 1, min.: | 0.25 mm² |
w. wire end ferrule, DIN 46228 pt 1, max.: | 1.5 mm² |
Type: | fine-wired |
nominal: | 0.25 mm² |
nominal: | 10 mm |
Type: | fine-wired |
nominal: | 0.34 mm² |
nominal: | 10 mm |
Type: | fine-wired |
nominal: | 0.5 mm² |
nominal: | 10 mm |
Type: | fine-wired |
nominal: | 0.75 mm² |
nominal: | 10 mm |
Type: | fine-wired |
nominal: | 1.5 mm² |
nominal: | 7 mm |
Reference text: | Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P) |
Max. clamping range: | 1.5 mm² |
tested acc. to standard: | IEC 60664-1, IEC 61984 |
Rated current, min. number of poles (Tu=20°C): | 17.5 A |
Rated current, max. number of poles (Tu=20°C): | 16 A |
Rated current, min. number of poles (Tu=40°C): | 17.5 A |
Rated current, max. number of poles (Tu=40°C): | 14 A |
Rated voltage for surge voltage class / pollution degree II/2: | 320 V |
Rated voltage for surge voltage class / pollution degree III/2: | 160 V |
Rated voltage for surge voltage class / pollution degree III/3: | 160 V |
Rated impulse voltage for surge voltage class/ pollution degree II/2: | 2.5 kV |
Rated impulse voltage for surge voltage class/ pollution degree III/2: | 2.5 kV |
Rated impulse voltage for surge voltage class/ contamination degree III/3: | 2.5 kV |
Short-time withstand current resistance: | 3 x 1s with 80 A |
Rated voltage (Use group B / CSA): | 300 V |
Rated voltage (Use group D / CSA): | 300 V |
Rated current (Use group B / CSA): | 10 A |
Rated current (Use group D / CSA): | 10 A |
Wire cross-section, AWG, min.: | AWG 28 |
Wire cross-section, AWG, max.: | AWG 14 |
Rated voltage (Use group B / UL 1059): | 300 V |
Rated voltage (Use group D / UL 1059): | 300 V |
Rated current (Use group B / UL 1059): | 12 A |
Rated current (Use group D / UL 1059): | 10 A |
Wire cross-section, AWG, min.: | AWG 28 |
Wire cross-section, AWG, max.: | AWG 14 |
Packaging: | Tape |
VPE length: | 0 |
VPE width: | 0 |
VPE height: | 0 |
Tape depth (T2): | 13 mm |
Tape width (W): | 56 mm |
Tape pocket depth (K0): | 12.5 mm |
Tape pocket height (A0): | 12.6 mm |
Tape pocket width (B0): | 43 mm |
Tape pocket separation (P1): | 20 mm |
Tape hole separation (E): | 1.75 mm |
Tape pocket separation (F): | 26.2 mm |
Tape reel diameter ∅ (A): | 330 mm |
ETIM 6.0: | EC002643 |
ETIM 7.0: | EC002643 |
eClass 9.0: | 27-44-04-01 |
eClass 9.1: | 27-44-04-01 |
eClass 10.0: | 27-44-04-01 |
IPC conformity: | Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. |
ECCN: | |
Kraj pochodzenia: | |
EAN: | |
Waga: | 0,006 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |