View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
2476920000
DRIKIT 24VAC 2CO LD/PB
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 2476920000
DRIKIT 24VAC 2CO LD/PB
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | DRIKIT 24VAC 2CO LD/PB |
| Order No.: | 2476920000 |
| Version: | D-SERIES DRI, Relay module, Number of contacts: 2, CO contact with test button AgSnO, Rated control voltage: 24 V AC, Continuous current: 5 A, Screw connection |
| GTIN (EAN): | 4050118497144 |
| Qty.: | 10 pc(s). |
| Width: | 15.8 mm |
| Width (inches): | 0.622 inch |
| Height: | 80.2 mm |
| Height (inches): | 3.157 inch |
| Depth: | 68 mm |
| Depth (inches): | 2.677 inch |
| Net weight: | 64 g |
| Humidity: | 35...85 % rel. humidity, no condensation |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...55 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 24 V AC |
| Rated current AC: | 50 mA |
| Power rating: | 1.2 VA |
| Coil resistance: | 240 Ω ± 10 % |
| Status indicator: | red LED |
| Rated switching voltage: | 250 V AC |
| Max. switching voltage, AC: | 250 V |
| Max. switching voltage, DC: | 250 V |
| Continuous current: | 5 A |
| AC switching capacity (resistive), max.: | 1250 VA |
| DC switching capacity (resistive), max.: | 150 W @ 24 V |
| Switch-on delay: | ≤ 15 ms |
| Switch-off delay: | ≤ 10 ms |
| Min. switching power: | 10 mA @ 12 V, 100 mA @ 5 V |
| Max. switching frequency at rated load: | 0.1 Hz |
| Contact type: | 2 CO contact with test button (AgSnO) |
| Rail: | TS 35 |
| Test button: | yes (lockable) |
| Mechanical switch position indicator: | Yes |
| Colour: | black |
| Rated voltage: | 250 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Insulating material group: | IIIb |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 3 mm |
| Impulse withstand voltage: | 4.8 kV (1.2/50 µs) |
| Standards: | IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011 |
| Certificate no. (cURus) relay: | E312083 |
| Certificate no. (cURus) base: | E355547 |
| Wire connection method: | Screw connection |
| Stripping length, rated connection: | 8 mm |
| Tightening torque, min.: | 0.5 Nm |
| Tightening torque, max.: | 0.8 Nm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.25 mm² |
| Clamping range, max.: | 4 mm² |
| Wire cross-section, solid, min.: | 0.25 mm² |
| Wire cross-section, solid, max.: | 4 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.25 mm² |
| Wire connection cross section, finely stranded, max.: | 4 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.25 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 4 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.25 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 4 mm² |
| Blade size: | size PH1 |
| Gauge to IEC 60947-1: | A3 |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| eClass 9.0: | 27-37-16-01 |
| eClass 9.1: | 27-37-16-01 |
| eClass 10.0: | 27-37-16-01 |
| ROHS: | Conform |
| Type: | DRIKIT 24VAC 2CO LD/PB |
| Order No.: | 2476920000 |
| Version: | D-SERIES DRI, Relay module, Number of contacts: 2, CO contact with test button AgSnO, Rated control voltage: 24 V AC, Continuous current: 5 A, Screw connection |
| GTIN (EAN): | 4050118497144 |
| Qty.: | 10 pc(s). |
| Width: | 15.8 mm |
| Width (inches): | 0.622 inch |
| Height: | 80.2 mm |
| Height (inches): | 3.157 inch |
| Depth: | 68 mm |
| Depth (inches): | 2.677 inch |
| Net weight: | 64 g |
| Humidity: | 35...85 % rel. humidity, no condensation |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...55 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 24 V AC |
| Rated current AC: | 50 mA |
| Power rating: | 1.2 VA |
| Coil resistance: | 240 Ω ± 10 % |
| Status indicator: | red LED |
| Rated switching voltage: | 250 V AC |
| Max. switching voltage, AC: | 250 V |
| Max. switching voltage, DC: | 250 V |
| Continuous current: | 5 A |
| AC switching capacity (resistive), max.: | 1250 VA |
| DC switching capacity (resistive), max.: | 150 W @ 24 V |
| Switch-on delay: | ≤ 15 ms |
| Switch-off delay: | ≤ 10 ms |
| Min. switching power: | 10 mA @ 12 V, 100 mA @ 5 V |
| Max. switching frequency at rated load: | 0.1 Hz |
| Contact type: | 2 CO contact with test button (AgSnO) |
| Rail: | TS 35 |
| Test button: | yes (lockable) |
| Mechanical switch position indicator: | Yes |
| Colour: | black |
| Rated voltage: | 250 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Insulating material group: | IIIb |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 3 mm |
| Impulse withstand voltage: | 4.8 kV (1.2/50 µs) |
| Standards: | IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011 |
| Certificate no. (cURus) relay: | E312083 |
| Certificate no. (cURus) base: | E355547 |
| Wire connection method: | Screw connection |
| Stripping length, rated connection: | 8 mm |
| Tightening torque, min.: | 0.5 Nm |
| Tightening torque, max.: | 0.8 Nm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.25 mm² |
| Clamping range, max.: | 4 mm² |
| Wire cross-section, solid, min.: | 0.25 mm² |
| Wire cross-section, solid, max.: | 4 mm² |
| Wire connection cross-section, finely stranded, min.: | 0.25 mm² |
| Wire connection cross section, finely stranded, max.: | 4 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.25 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 4 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.25 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 4 mm² |
| Blade size: | size PH1 |
| Gauge to IEC 60947-1: | A3 |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| eClass 9.0: | 27-37-16-01 |
| eClass 9.1: | 27-37-16-01 |
| eClass 10.0: | 27-37-16-01 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,067 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |