1542450000
DRMKIT 230VAC 4CO LD
Type: | DRMKIT 230VAC 4CO LD |
Order No.: | 1542450000 |
Version: | D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi 0,15 μm Au, Rated control voltage: 230 V AC, Continuous current: 5 A, Screw connection |
GTIN (EAN): | 4050118347258 |
Qty.: | 10 pc(s). |
Width: | 27.2 mm |
Width (inches): | 1.071 inch |
Height: | 79.9 mm |
Height (inches): | 3.146 inch |
Depth: | 66.8 mm |
Depth (inches): | 2.63 inch |
Net weight: | 93.35 g |
Operating temperature, max.: | 55 °C |
Operating temperature, min.: | -40 °C |
Storage temperature, max.: | 70 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -40 °C...55 °C |
Storage temperature: | -40 °C...70 °C |
REACH SVHC: | Lead 7439-92-1 |
Rated control voltage: | 230 V AC |
Rated current AC: | 6.1 mA (50 Hz), 5.2 mA (60 Hz) |
Power rating: | 1.0...1.2VA (60HZ) |
Coil resistance: | 15000 Ω ± 10 % |
Status indicator: | red LED |
Rated switching voltage: | 250 V AC |
Max. switching voltage, AC: | 250 V |
Continuous current: | 5 A |
Inrush current: | 10 A / 50 ms |
AC switching capacity (resistive), max.: | 1250 VA |
DC switching capacity (resistive), max.: | 120 W @ 24 V |
Switch-on delay: | < 20 ms |
Switch-off delay: | < 20 ms |
Min. switching power: | 10 mA @ 12 V, 100 mA @ 5 V |
Max. switching frequency at rated load: | 0.1 Hz |
Contact type: | 4 CO contact (AgNi 0,15 μm Au) |
Contact resistance: | ≤ 50 mΩ |
Rail: | TS 35 |
Test button: | No |
Mechanical switch position indicator: | Yes |
Colour: | black |
Rated voltage: | 250 V |
Surge voltage category: | III |
Pollution severity: | 2 |
Insulating material group: | C |
Protection degree: | IP20 |
Creepage and clearance distance input – output: | ≥ 5.5 mm |
Impulse withstand voltage: | 4.8 kV (1.2/50 µs) |
Certificate no. (cURus) relay: | E312083 |
Certificate no. (cURus) base: | E312083 |
Wire connection method: | Screw connection |
Stripping length, rated connection: | 7 mm |
Tightening torque, min.: | 0.5 Nm |
Tightening torque, max.: | 0.7 Nm |
Clamping range, min.: | 0.5 mm² |
Clamping range, max.: | 2.5 mm² |
Wire cross-section, solid, min.: | 0.5 mm² |
Wire cross-section, solid, max.: | 2.5 mm² |
Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
Wire connection cross section, finely stranded, max.: | 2.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 2.5 mm² |
Wire connection cross section, finely stranded, two clampable wires, min.: | 0.5 mm² |
Wire cross-section, finely stranded, two clampable wires, max.: | 1 mm² |
Blade size: | size PH1 |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ROHS: | Conform |
Type: | DRMKIT 230VAC 4CO LD |
Order No.: | 1542450000 |
Version: | D-SERIES DRM, Relay module, Number of contacts: 4, CO contact AgNi 0,15 μm Au, Rated control voltage: 230 V AC, Continuous current: 5 A, Screw connection |
GTIN (EAN): | 4050118347258 |
Qty.: | 10 pc(s). |
Width: | 27.2 mm |
Width (inches): | 1.071 inch |
Height: | 79.9 mm |
Height (inches): | 3.146 inch |
Depth: | 66.8 mm |
Depth (inches): | 2.63 inch |
Net weight: | 93.35 g |
Operating temperature, max.: | 55 °C |
Operating temperature, min.: | -40 °C |
Storage temperature, max.: | 70 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -40 °C...55 °C |
Storage temperature: | -40 °C...70 °C |
REACH SVHC: | Lead 7439-92-1 |
Rated control voltage: | 230 V AC |
Rated current AC: | 6.1 mA (50 Hz), 5.2 mA (60 Hz) |
Power rating: | 1.0...1.2VA (60HZ) |
Coil resistance: | 15000 Ω ± 10 % |
Status indicator: | red LED |
Rated switching voltage: | 250 V AC |
Max. switching voltage, AC: | 250 V |
Continuous current: | 5 A |
Inrush current: | 10 A / 50 ms |
AC switching capacity (resistive), max.: | 1250 VA |
DC switching capacity (resistive), max.: | 120 W @ 24 V |
Switch-on delay: | < 20 ms |
Switch-off delay: | < 20 ms |
Min. switching power: | 10 mA @ 12 V, 100 mA @ 5 V |
Max. switching frequency at rated load: | 0.1 Hz |
Contact type: | 4 CO contact (AgNi 0,15 μm Au) |
Contact resistance: | ≤ 50 mΩ |
Rail: | TS 35 |
Test button: | No |
Mechanical switch position indicator: | Yes |
Colour: | black |
Rated voltage: | 250 V |
Surge voltage category: | III |
Pollution severity: | 2 |
Insulating material group: | C |
Protection degree: | IP20 |
Creepage and clearance distance input – output: | ≥ 5.5 mm |
Impulse withstand voltage: | 4.8 kV (1.2/50 µs) |
Certificate no. (cURus) relay: | E312083 |
Certificate no. (cURus) base: | E312083 |
Wire connection method: | Screw connection |
Stripping length, rated connection: | 7 mm |
Tightening torque, min.: | 0.5 Nm |
Tightening torque, max.: | 0.7 Nm |
Clamping range, min.: | 0.5 mm² |
Clamping range, max.: | 2.5 mm² |
Wire cross-section, solid, min.: | 0.5 mm² |
Wire cross-section, solid, max.: | 2.5 mm² |
Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
Wire connection cross section, finely stranded, max.: | 2.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.5 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 2.5 mm² |
Wire connection cross section, finely stranded, two clampable wires, min.: | 0.5 mm² |
Wire cross-section, finely stranded, two clampable wires, max.: | 1 mm² |
Blade size: | size PH1 |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ROHS: | Conform |
ECCN: | |
Kraj pochodzenia: | |
EAN: | |
Waga: | 0,104 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |