1165480010
CP M SNT 250W 24V 10AUW
Delivery status: | This article will no longer be available in the future. |
Available until: | 2020-12-31 |
Type: | CP M SNT 250W 24V 10AUW |
Order No.: | 1165480010 |
Version: | Power supply, switch-mode power supply unit, 24 V |
GTIN (EAN): | 4050118117318 |
Qty.: | 1 pc(s). |
Width: | 60 mm |
Width (inches): | 2.362 inch |
Height: | 130 mm |
Height (inches): | 5.118 inch |
Depth: | 155 mm |
Depth (inches): | 6.102 inch |
Net weight: | 1,300 g |
Operating temperature, max.: | 70 °C |
Operating temperature, min.: | -25 °C |
Storage temperature, max.: | 85 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -25 °C...70 °C |
Ambient temperature: | -25 °C...+70 °C (derating from 60 °C) |
Storage temperature: | -40 °C...85 °C |
REACH SVHC: | Lead 7439-92-1 |
AC current consumption: | 1.2 A @ 230 V AC / 2.4 A @ 115 V AC |
AC input voltage range: | 85...264 V AC (derating at 100 V AC) |
Connection system: | Screw connection |
DC current consumption: | 0.8 A @ 370 V DC / 2.3 A @ 120 V DC |
DC input voltage range: | 80…430 V DC |
Frequency range AC: | 47...63 Hz |
Input fuse (internal): | Yes |
Inrush current: | max. 12 A |
Rated input voltage: | 100...240 V AC (wide-range input) |
Wire connection method: | Screw connection |
Continous output current @ UNominal: | 12 A @ 45 °C, 10,7 A @ 55 °C, 7,5 A @ 70 °C |
Nominal output current for Unom: | 10 A @ 60 °C |
Output current: | 10A |
Output voltage: | 24 V |
Output voltage: | 22.5...29.5 V (adjustable via potentiometer on front) |
Output voltage type: | DC |
Overload protection: | Yes |
Parallel connection option: | yes, max. 5 (without diode module) |
Rated output voltage: | 24 V DC ± 1 % |
Reserve capacity @ UNominal: | 12 A for 1 min, ED = 5 % |
Wire connection method: | Screw connection |
AC failure bridging time @ Inom: | > 20 ms @ 230 V AC / > 20 ms @ 115 V AC |
Ambient temperature: | -25 °C...+70 °C (derating from 60 °C) |
Clip-in foot: | metal |
Degree of efficiency: | 90 % @ 230 V AC / 87 % @ 115 V AC |
Housing version: | Metal, corrosion resistant |
Indication: | Dual LED Operational: green LED, Error: red LED |
MTBF: | > 500,000 h in accordance with IEC 61709 (SN29500) |
Max. perm. air humidity (operational): | 5 %…95 % RH |
Mounting position, installation notice: | Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between. |
Operating temperature: | -25 °C...70 °C |
Power factor (approx.): | > 0.99 @ 230 V AC / > 0.97 @ 115 V AC |
Protection against over-heating: | Yes |
Protection against reverse voltages from the load: | 30…35 V DC |
Protection degree: | IP20 |
Short-circuit protection: | Yes |
Output current: | 10A |
Limiting of mains voltage harmonic currents: | According to EN 61000-3-2 |
Noise emission in accordance with EN55032: | Class B |
Interference immunity test acc. to: | EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)|EN 61000-4-11 (dips) |
Shock resistance IEC 60068-2-27: | 30 g in all directions |
Insulation voltage: | 3 kV input/ouput; 2 kV input/earth; 0.5 kV output/earth |
Pollution severity: | 2 |
Protection class: | I, with PE connection |
Electrical machine equipment: | Acc. to EN60204 |
For use with electronic equipment: | Acc. to EN50178 / VDE0160 |
Protection against dangerous shock currents: | Acc. to VDE0106-101 |
Protective separation / protection against electrical shock: | VDE0100-410 / acc. to DIN57100-410 |
Safety extra-low voltage: | SELV according to EN 60950, PELV according to EN 60204 |
Safety transformers for switch-mode power supplies: | According to EN 61558-2-16 |
Conductor cross-section, AWG/kcmil , max.: | 12 |
Conductor cross-section, AWG/kcmil , min.: | 26 |
Conductor cross-section, flexible , min.: | 0.5 mm² |
Conductor cross-section, rigid , max.: | 6 mm² |
Conductor cross-section, rigid , min.: | 0.5 mm² |
Connection system: | Screw connection |
Number of terminals: | 3 for L/N/PE |
Tightening torque, max.: | 0.6 Nm |
Tightening torque, min.: | 0.5 Nm |
Wire connection cross section, flexible (input), max.: | 2.5 mm² |
Conductor cross-section, AWG/kcmil , max.: | 12 |
Conductor cross-section, AWG/kcmil , min.: | 26 |
Conductor cross-section, flexible , max.: | 2.5 mm² |
Conductor cross-section, flexible , min.: | 0.5 mm² |
Conductor cross-section, rigid , max.: | 6 mm² |
Conductor cross-section, rigid , min.: | 0.5 mm² |
Number of terminals: | 6 (+,+,-,-,COM,NO) |
Tightening torque, max.: | 0.6 Nm |
Tightening torque, min.: | 0.5 Nm |
Contact load (NO contact): | max. 30 V DC / 0.5 A |
Floating contact: | Yes |
Relay on/off: | Output voltage > 21.6 V / < 20.4 V |
Status indicator: | Green LED, red LED |
Certificate No. (GERMLLOYD): | TAA00001H0 |
Certificate no. (cULus): | E258476 |
ETIM 6.0: | EC002540 |
ETIM 7.0: | EC002540 |
eClass 9.0: | 27-04-07-01 |
eClass 9.1: | 27-04-07-01 |
eClass 10.0: | 27-04-07-01 |
ROHS: | Conform |
Delivery status: | This article will no longer be available in the future. |
Available until: | 2020-12-31 |
Type: | CP M SNT 250W 24V 10AUW |
Order No.: | 1165480010 |
Version: | Power supply, switch-mode power supply unit, 24 V |
GTIN (EAN): | 4050118117318 |
Qty.: | 1 pc(s). |
Width: | 60 mm |
Width (inches): | 2.362 inch |
Height: | 130 mm |
Height (inches): | 5.118 inch |
Depth: | 155 mm |
Depth (inches): | 6.102 inch |
Net weight: | 1,300 g |
Operating temperature, max.: | 70 °C |
Operating temperature, min.: | -25 °C |
Storage temperature, max.: | 85 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -25 °C...70 °C |
Ambient temperature: | -25 °C...+70 °C (derating from 60 °C) |
Storage temperature: | -40 °C...85 °C |
REACH SVHC: | Lead 7439-92-1 |
AC current consumption: | 1.2 A @ 230 V AC / 2.4 A @ 115 V AC |
AC input voltage range: | 85...264 V AC (derating at 100 V AC) |
Connection system: | Screw connection |
DC current consumption: | 0.8 A @ 370 V DC / 2.3 A @ 120 V DC |
DC input voltage range: | 80…430 V DC |
Frequency range AC: | 47...63 Hz |
Input fuse (internal): | Yes |
Inrush current: | max. 12 A |
Rated input voltage: | 100...240 V AC (wide-range input) |
Wire connection method: | Screw connection |
Continous output current @ UNominal: | 12 A @ 45 °C, 10,7 A @ 55 °C, 7,5 A @ 70 °C |
Nominal output current for Unom: | 10 A @ 60 °C |
Output current: | 10A |
Output voltage: | 24 V |
Output voltage: | 22.5...29.5 V (adjustable via potentiometer on front) |
Output voltage type: | DC |
Overload protection: | Yes |
Parallel connection option: | yes, max. 5 (without diode module) |
Rated output voltage: | 24 V DC ± 1 % |
Reserve capacity @ UNominal: | 12 A for 1 min, ED = 5 % |
Wire connection method: | Screw connection |
AC failure bridging time @ Inom: | > 20 ms @ 230 V AC / > 20 ms @ 115 V AC |
Ambient temperature: | -25 °C...+70 °C (derating from 60 °C) |
Clip-in foot: | metal |
Degree of efficiency: | 90 % @ 230 V AC / 87 % @ 115 V AC |
Housing version: | Metal, corrosion resistant |
Indication: | Dual LED Operational: green LED, Error: red LED |
MTBF: | > 500,000 h in accordance with IEC 61709 (SN29500) |
Max. perm. air humidity (operational): | 5 %…95 % RH |
Mounting position, installation notice: | Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between. |
Operating temperature: | -25 °C...70 °C |
Power factor (approx.): | > 0.99 @ 230 V AC / > 0.97 @ 115 V AC |
Protection against over-heating: | Yes |
Protection against reverse voltages from the load: | 30…35 V DC |
Protection degree: | IP20 |
Short-circuit protection: | Yes |
Output current: | 10A |
Limiting of mains voltage harmonic currents: | According to EN 61000-3-2 |
Noise emission in accordance with EN55032: | Class B |
Interference immunity test acc. to: | EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)|EN 61000-4-11 (dips) |
Shock resistance IEC 60068-2-27: | 30 g in all directions |
Insulation voltage: | 3 kV input/ouput; 2 kV input/earth; 0.5 kV output/earth |
Pollution severity: | 2 |
Protection class: | I, with PE connection |
Electrical machine equipment: | Acc. to EN60204 |
For use with electronic equipment: | Acc. to EN50178 / VDE0160 |
Protection against dangerous shock currents: | Acc. to VDE0106-101 |
Protective separation / protection against electrical shock: | VDE0100-410 / acc. to DIN57100-410 |
Safety extra-low voltage: | SELV according to EN 60950, PELV according to EN 60204 |
Safety transformers for switch-mode power supplies: | According to EN 61558-2-16 |
Conductor cross-section, AWG/kcmil , max.: | 12 |
Conductor cross-section, AWG/kcmil , min.: | 26 |
Conductor cross-section, flexible , min.: | 0.5 mm² |
Conductor cross-section, rigid , max.: | 6 mm² |
Conductor cross-section, rigid , min.: | 0.5 mm² |
Connection system: | Screw connection |
Number of terminals: | 3 for L/N/PE |
Tightening torque, max.: | 0.6 Nm |
Tightening torque, min.: | 0.5 Nm |
Wire connection cross section, flexible (input), max.: | 2.5 mm² |
Conductor cross-section, AWG/kcmil , max.: | 12 |
Conductor cross-section, AWG/kcmil , min.: | 26 |
Conductor cross-section, flexible , max.: | 2.5 mm² |
Conductor cross-section, flexible , min.: | 0.5 mm² |
Conductor cross-section, rigid , max.: | 6 mm² |
Conductor cross-section, rigid , min.: | 0.5 mm² |
Number of terminals: | 6 (+,+,-,-,COM,NO) |
Tightening torque, max.: | 0.6 Nm |
Tightening torque, min.: | 0.5 Nm |
Contact load (NO contact): | max. 30 V DC / 0.5 A |
Floating contact: | Yes |
Relay on/off: | Output voltage > 21.6 V / < 20.4 V |
Status indicator: | Green LED, red LED |
Certificate No. (GERMLLOYD): | TAA00001H0 |
Certificate no. (cULus): | E258476 |
ETIM 6.0: | EC002540 |
ETIM 7.0: | EC002540 |
eClass 9.0: | 27-04-07-01 |
eClass 9.1: | 27-04-07-01 |
eClass 10.0: | 27-04-07-01 |
ROHS: | Conform |
ECCN: | |
Kraj pochodzenia: | |
EAN: | |
Waga: | 1,388 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |