101167898
CSS 8-180-2P-Y-LST
Thermoplastic enclosure. 2 x Connector M12, 4-pole. Misaligned actuation possible. Electronic contact-free, coded system. Max. length of the sensor chain 200 m. 2 short-circuit proof PNP safety outputs. Self-monitoring series-wiring of 16 sensors. High repeat accuracy of the switching points. Early warning when operating near the limit of the, sensor's hysteris range
Product type description: | CSS 8-180-2P-Y-LST |
Article number (order number): | 101167898 |
EAN (European Article Number): | 4030661219523 |
eCl@ss number, Version 9.0: | 27-27-24-03 |
Certificates: | IFA cULus EAC |
Product name: | CSS 180 |
Standards: | IEC 61508 IEC 60947-5-3 |
Active principle: | inductive |
Housing construction form: | Cylinder, thread |
Installation conditions (mechanical): | not flush |
Sensor topology: | Sensor for series wiring |
Enclosure material: | Glass-fibre, reinforced thermoplastic |
Active area: | Glass-fibre, reinforced thermoplastic |
Material of the nuts: | Glass-fibre, reinforced thermoplastic |
Weight: | 154 g |
Reaction time, maximum: | 30 ms |
Duration of risk, maximum: | 30 ms |
Short circuit detection: | Yes |
Short-circuit recognition: | Yes |
Safety functions: | Yes |
Cascadable: | Yes |
Integral System Diagnostics, status: | Yes |
Number of fail-safe digital outputs: | 2 |
Number of Series-wiring of sensors: | 16 |
Standards: | ISO 13849-1 IEC 60947-5-3 IEC 61508 |
Performance Level: | e |
Control category to EN13849: | 4 |
PFH-value: | 2.50 x 10-9 /h |
Safety Integrity Level (SIL): | 3 |
Mission Time: | 20 Year(s) |
Switch distance: | 8 mm |
Ensured switch distance "ON" Sao: | 7 mm |
Ensured switch distance "OFF" Sar: | 10 mm |
Hysteresis (Switch distance), maximum: | 0.7 mm |
Repeat accuracy R R: | 0.2 mm |
Tightening torque of nuts, maximum: | 3 Nm |
Terminal Connector: | Cable with connector |
Terminal connector, Input: | Female connector M12, 4-pole |
Terminal connector, Output: | M12 connector, 4 pole |
ISO thread of the sensor: | M18 |
width across flats: | 24 BK |
Length of sensor: | 92 mm |
Protection class: | IP 65 to IEC/EN 60529 IP 67 to IEC/EN 60529 |
Ambient temperature, minimum: | -25 °C |
Ambient temperature, maximum: | +60 °C |
Storage and transport temperature, minimum: | -25 °C |
Storage and transport temperature, maximum: | +85 °C |
Resistance to vibrations to EN 60068-2-6: | 10 … 55 Hz, amplitude 1 mm |
Restistance to shock: | 30 g / 11 ms |
Rated impulse withstand voltage: | 0.8 kV |
Degree of pollution to VDE 0100: | 3 |
Voltage type: | DC (direct current) |
Operating voltage, minimum: | 20.4 VDC |
Operating voltage, maximum: | 26.4 VDC |
No-load current: | 50 mA |
Rated operating voltage: | 24 VDC |
Operating current: | 1,000 mA |
Switching frequency, approx.: | 3 Hz |
Rated operating current (safety outputs): | 500 mA |
Output current, (fail-safe output), maximum: | 0.5 A |
Current leakage: | 0.5 mA |
Note (LED switching conditions display): | Multi-coloured LED: Green, Red, Yellow |
PIN 1: | 1A1 Ue: (1) |
PIN 2: | Y2 safety output 2, X2 safety input 2: White |
PIN 3: | A2 GND |
PIN 4: | Y1 safety output 1, X1 safety input 1: Black |
Included in delivery: | Actuators must be ordered separately. |
Delivery scope of Mounting material: | 2x nuts M18 x 1 |
Recommendation (actuator): | CST 180-1 CST 180-2 |
Note (General): | Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.25 ms. Short-circuit recognition by the evaluation is not necessary. |
PIN 1: | A1 Ue |
PIN 2: | Y2 Sicherheitsausgang 2, X2 Sicherheitseingang 2: weiß |
PIN 3: | A2 GND |
PIN 4: | Y1 Sicherheitsausgang 1, X1 Sicherheitseingang 1: schwarz |
Lieferumfang: | Die Betätiger sind nicht im Lieferumfang enthalten. |
Lieferumfang des Montagematerials: | 2x Muttern M18 x 1 |
Empfehlung (Betätiger): | CST 180-1 CST 180-2 |
Empfehlung Sicherheitsschaltgerät: | PROTECT PSC1 SRB-E-301ST SRB-E-201LC |
Hinweis (Allgemein): | Anforderungen an die Auswertung: Zweikanaliger Sicherheitseingang, geeignet für p-schaltende Sensoren mit Schließerfunktion. Die Funktionstests der Sensoren mit zyklischem Abschalten der Sensorausgänge für max. 0,25 ms müssen von der Auswertung toleriert werden. Eine Querschlusserkennung in der Auswertung ist nicht notwendig. |
ECCN: | |
Kraj pochodzenia: | DE |
EAN: | |
Waga: | 0,15 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |