Article image IA0145

Rechner Sensors IA0145

IAS-30-A13-N-M18-PTFE-Z05-0-1G-1D

Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"

Opis

Inductive Sensors. Series 30 – NAMUR EN 60947-5-6 – ATEX – StEx. Housing M 18 x 1. Housing material: PTFE. For use in areas with the risk of gas explosion, zone 0. For use in areas with the risk of dust explosion, zone 20. Sensing distance Sn = 5 mm. DMT 03 ATEX E 048 IECEx BVS 07.0031. II 1G Ex ia IIC T1-T6 Ga Ex ia IIC T1-T6 Ga. II 1D Ex ia IIIC T101°C Da Ex ia IIIC T101°C Da. CNEX

Pliki do pobrania

Parametry techniczne

Thread / Process connection: M 18 x 1
Housing material active surface: PTFE (FDA 21 CFR 177.1550)
Housing material: PTFE (FDA 21 CFR 177.1550)
Housing material lid: PC (FDA 21 CFR 177.1580)
Electrical version: 2-Leiter DC
Permitted residual ripple max.: 5%
Frequency of operating cycles max.: 1,5 kHz
Protective circuit: Eingebaut
Degree of protection IEC 60529: IP 67
Norm: EN 60947-5-6
Selfinductance (L): 2 mH
Selfcapacitance (C): 250 nF
Operating current active surface free: > typ. 2 mA
Operating current active surface covered: < typ. 1,5 mA
Sensing dinstance Sn: 5 mm
Operating voltage: 5…15 V DC, Ui = 15 V DC
Permitted ambient temperature min.: -20 °C
Permitted ambient temperature max.: +70 °C
Installation: Bündig
Output function: NAMUR
Cable length: 5 m
Connection: PTFE-Kabel, 2 x 0,22 mm²
CE: JA
RoHS: JA
ATEX product marking dust: Ex II 1D Ex ia Ex IIIC T 101°C Da
ATEX product marking gas: Ex II 1G Ex ia Ex IIC T1 – T6 Ga
Certified Zones ATEX: 1G1D
IECEX product marking dust: Ex ia IIIC T101° Da
IECEX product marking gas: Ex ia IIC T1 – T6 Ga
MTTF: 3664,46 Jahre
WHG certification: Auf Anfrage

Parametry logistyczne

ECCN:
Kraj pochodzenia:
EAN:
Waga: 0,00 kg
Długość: 0,00 m
Szerokość: 0,00 m
Wysokość: 0,00 m