3002371
PTU 35/4X10
Note: | In the end application, the applicable safety regulations for overload and short-circuit protection on the connected conductors must be considered. |
Number of levels: | 1 |
Number of connections: | 5 |
Nominal cross section: | 16 mm² |
Color: | gray |
Insulating material: | PA |
Flammability rating according to UL 94: | V0 |
Rated surge voltage: | 8 kV |
Degree of pollution: | 2 |
Overvoltage category: | III |
Insulating material group: | I |
Maximum power dissipation for nominal condition: | 4.06 W (the value is multiplied when connecting multiple levels) |
Ambient temperature (operation): | -60 °C ... 85 °C |
Ambient temperature (storage/transport): | -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) |
Permissible humidity (storage/transport): | 30 % ... 70 % |
Ambient temperature (assembly): | -5 °C ... 70 °C |
Ambient temperature (actuation): | -5 °C ... 70 °C |
Connection method: | Screw connection |
Connection in acc. with standard: | IEC 60947-7-1 |
Maximum load current: | 101 A (The maximum load current must not be exceeded by the total current of all connected conductors.) |
Nominal current IN: | 101 A |
Nominal voltage UN: | 1000 V |
Connection method: | Push-in connection |
Connection in acc. with standard: | IEC 60947-7-1 |
Maximum load current: | 57 A |
Nominal current IN: | 57 A |
Nominal voltage UN: | 1000 V |
Open side panel: | No |
Back of the hand protection: | guaranteed |
Finger protection: | guaranteed |
Result of surge voltage test: | Test passed |
Surge voltage test setpoint: | 9.8 kV |
Result of power-frequency withstand voltage test: | Test passed |
Power frequency withstand voltage setpoint: | 2.2 kV |
Result of the test for mechanical stability of terminal points (5 x conductor connection): | Test passed |
Result of bending test: | Test passed |
Bending test rotation speed: | 10 rpm |
Bending test turns: | 135 |
Bending test conductor cross section/weight: | 2.5 mm² / 0.7 kg |
Tensile test result: | Test passed |
Conductor cross section tensile test: | 2.5 mm² |
Tractive force setpoint: | 50 N |
Conductor cross section tensile test: | 10 mm² |
Tractive force setpoint: | 90 N |
Conductor cross section tensile test: | 35 mm² |
Tractive force setpoint: | 190 N |
Result of tight fit on support: | Test passed |
Tight fit on carrier: | NS 35 |
Setpoint: | 5 N |
Result of voltage-drop test: | Test passed |
Requirements, voltage drop: | ≤ 1.6 mV |
Result of temperature-rise test: | Test passed |
Short circuit stability result: | Test passed |
Conductor cross section short circuit testing: | 10 mm² |
Short-time current: | 1.2 kA |
Conductor cross section short circuit testing: | 16 mm² |
Short-time current: | 1.92 kA |
Conductor cross section short circuit testing: | 35 mm² |
Short-time current: | 4.2 kA |
Result of aging test: | Test passed |
Ageing test for screwless modular terminal block temperature cycles: | 192 |
Result of thermal test: | Test passed |
Proof of thermal characteristics (needle flame) effective duration: | 30 s |
Oscillation, broadband noise test result: | Test passed |
Test specification, oscillation, broadband noise: | DIN EN 50155 (VDE 0115-200):2008-03 |
Test spectrum: | Service life test category 2, bogie-mounted |
Test frequency: | f1 = 5 Hz to f2 = 250 Hz |
ASD level: | 6.12 (m/s2)2/Hz |
Acceleration: | 3.12 g |
Test duration per axis: | 5 h |
Test directions: | X-, Y- and Z-axis |
Shock test result: | Test passed |
Test specification, shock test: | DIN EN 50155 (VDE 0115-200):2008-03 |
Shock form: | Half-sine |
Acceleration: | 30g |
Shock duration: | 18 ms |
Number of shocks per direction: | 3 |
Test directions: | X-, Y- and Z-axis (pos. and neg.) |
Relative insulation material temperature index (Elec., UL 746 B): | 130 °C |
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): | 130 °C |
Static insulating material application in cold: | -60 °C |
Surface flammability NFPA 130 (ASTM E 162): | passed |
Specific optical density of smoke NFPA 130 (ASTM E 662): | passed |
Smoke gas toxicity NFPA 130 (SMP 800C): | passed |
Calorimetric heat release NFPA 130 (ASTM E 1354): | 28 MJ/kg |
Fire protection for rail vehicles (DIN EN 45545-2) R22: | HL 1 - HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R23: | HL 1 - HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R24: | HL 1 - HL 3 |
Fire protection for rail vehicles (DIN EN 45545-2) R26: | HL 1 - HL 3 |
Width: | 19.4 mm |
Length: | 79.9 mm |
Height NS 35/7,5: | 50.3 mm |
Height NS 35/15: | 57.8 mm |
Connection method: | Screw connection |
Connection in acc. with standard: | IEC 60947-7-1 |
Screw thread: | M6 |
Tightening torque, min: | 3.2 Nm |
Tightening torque max: | 3.7 Nm |
Stripping length: | 18 mm |
Conductor cross section solid min.: | 1.5 mm² |
Conductor cross section solid max.: | 50 mm² |
Conductor cross section AWG min.: | 8 |
Conductor cross section AWG max.: | 2 |
Conductor cross section flexible min.: | 1.5 mm² |
Conductor cross section flexible max.: | 35 mm² |
Min. AWG conductor cross section, flexible: | 8 |
Max. AWG conductor cross section, flexible: | 2 |
Conductor cross section flexible, with ferrule without plastic sleeve min.: | 1.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max.: | 35 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve min.: | 1.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max.: | 35 mm² |
2 conductors with same cross section, solid min.: | 1.5 mm² |
2 conductors with same cross section, solid max.: | 16 mm² |
Two conductors with the same cross section, AWG solid min.: | 16 |
Two conductors with the same cross section, AWG solid max.: | 6 |
2 conductors with same cross section, stranded min.: | 1.5 mm² |
2 conductors with same cross section, stranded max.: | 10 mm² |
Two conductors with the same cross section, AWG stranded, min.: | 16 |
Two conductors with the same cross section, AWG stranded, max.: | 8 |
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum: | 1.5 mm² |
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum: | 10 mm² |
Connection cross sections directly pluggable: | 1 mm² 16 mm² 16 6 4 mm² 10 mm² |
Conductor cross section solid min.: | 1 mm² |
Conductor cross section solid max.: | 16 mm² |
Conductor cross section AWG min.: | 16 |
Conductor cross section AWG max.: | 6 |
Conductor cross section flexible min.: | 4 mm² |
Conductor cross section flexible max.: | 10 mm² |
Internal cylindrical gage: | B9 |
Connection method: | Push-in connection |
Connection in acc. with standard: | IEC 60947-7-1 |
Conductor cross section solid min.: | 0.5 mm² |
Conductor cross section solid max.: | 16 mm² |
Conductor cross section AWG min.: | 20 |
Conductor cross section AWG max.: | 6 |
Conductor cross section flexible min.: | 0.5 mm² |
Conductor cross section flexible max.: | 10 mm² |
Min. AWG conductor cross section, flexible: | 20 |
Max. AWG conductor cross section, flexible: | 8 |
Conductor cross section flexible, with ferrule without plastic sleeve min.: | 0.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max.: | 10 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve min.: | 0.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max.: | 10 mm² |
Connection in acc. with standard: | IEC 60947-7-1 |
Flammability rating according to UL 94: | V0 |
eCl@ss 10.0.1: | 27141120 |
eCl@ss 4.0: | 27141127 |
eCl@ss 4.1: | 27141127 |
eCl@ss 5.0: | 27141127 |
eCl@ss 5.1: | 27141111 |
eCl@ss 6.0: | 27141100 |
eCl@ss 7.0: | 27141120 |
eCl@ss 8.0: | 27141120 |
eCl@ss 9.0: | 27141120 |
ETIM 3.0: | EC000897 |
ETIM 4.0: | EC000897 |
ETIM 5.0: | EC000897 |
ETIM 6.0: | EC000897 |
ETIM 7.0: | EC000897 |
UNSPSC 6.01: | 30211812 |
UNSPSC 7.0901: | 39121410 |
UNSPSC 11: | 39121411 |
UNSPSC 12.01: | 39121411 |
UNSPSC 13.2: | 39121411 |
UNSPSC 18.0: | 39121410 |
UNSPSC 19.0: | 39121410 |
UNSPSC 20.0: | 39121410 |
UNSPSC 21.0: | 39121410 |
ECCN: | |
Kraj pochodzenia: | IN |
EAN: | |
Waga: | 0,071 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |