2909848
RIF-1-RSC-LDP-24DC/2X21/FG
Utilization restriction: | EMC: class A product, see manufacturer's declaration in the download area |
Width: | 16 mm |
Height: | 89 mm |
Depth: | 75 mm |
Ambient temperature (operation): | -20 °C ... 50 °C |
Ambient temperature (storage/transport): | -20 °C ... 70 °C |
Degree of protection: | IP20 (Relay base) |
Nominal input voltage UN: | 24 V DC |
Input voltage range in reference to UN: | see diagram |
Typical input current at UN: | 30 mA |
Typical response time: | 10 ms |
Typical release time: | 10 ms |
Coil voltage: | 24 V DC |
Protective circuit: | Damping diode |
Operating voltage display: | Yellow LED |
Power dissipation for nominal condition: | 0.72 W |
Contact type: | 2 changeover contacts, forcibly actuated |
Type of switch contact: | Single contact |
Contact material: | AgNi |
Maximum switching voltage: | 250 V AC/DC |
Minimum switching voltage: | 15 V AC/DC |
Min. switching current: | 10 mA |
Maximum inrush current: | 6 A |
Limiting continuous current: | 6 A |
Interrupting rating (ohmic load) max.: | 144 W (at 24 V DC) |
Switching capacity: | 2 A (at 24 V, DC13) |
Operating mode: | 100% operating factor |
Flammability rating according to UL 94: | V2 (Housing) |
Mechanical service life: | approx. 107 cycles |
Mounting position: | any |
Assembly instructions: | In rows with zero spacing |
B10d: | 600000 Cycles (AC1; 250 V / 6 A; 1 NO) |
Connection name: | Coil side |
Connection method: | Screw connection |
Stripping length: | 8 mm |
Conductor cross section solid: | 0.5 mm² ... 4 mm² |
Conductor cross-section solid (2 conductors with same cross section): | 0.5 mm² ... 2.5 mm² |
Conductor cross section flexible: | 0.5 mm² ... 4 mm² |
Conductor cross section flexible (2 conductors with same cross section): | 0.5 mm² ... 2.5 mm² |
Conductor cross section AWG: | 20 ... 10 (solid) |
Torque: | 0.5 Nm ... 0.6 Nm |
Connection name: | Contact side |
Connection method: | Screw connection |
Stripping length: | 8 mm |
Conductor cross section solid: | 0.5 mm² ... 4 mm² |
Conductor cross-section solid (2 conductors with same cross section): | 0.5 mm² ... 2.5 mm² |
Conductor cross section flexible: | 0.5 mm² ... 4 mm² |
Conductor cross section flexible (2 conductors with same cross section): | 0.5 mm² ... 2.5 mm² |
Conductor cross section AWG: | 20 ... 10 (solid) |
Torque: | 0.5 Nm ... 0.6 Nm |
Designation: | Air clearances and creepage distances between the power circuits |
Standards/regulations: | DIN EN 50178/VDE 0160 |
Rated insulation voltage: | 250 V |
Rated surge voltage: | 6 kV |
Insulation: | safe isolation |
Pollution degree: | 2 |
Overvoltage category: | III |
Conformance: | CE-compliant |
China RoHS: | Environmentally Friendly Use Period = 50 years |
eCl@ss 10.0.1: | 27371601 |
eCl@ss 5.0: | 27371600 |
eCl@ss 5.1: | 27371600 |
eCl@ss 6.0: | 27371600 |
eCl@ss 7.0: | 27371601 |
eCl@ss 8.0: | 27371601 |
eCl@ss 9.0: | 27371601 |
ETIM 2.0: | EC001437 |
ETIM 3.0: | EC001437 |
ETIM 4.0: | EC001437 |
ETIM 5.0: | EC001437 |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
UNSPSC 13.2: | 39122334 |
UNSPSC 18.0: | 39122334 |
UNSPSC 19.0: | 39122334 |
UNSPSC 20.0: | 39122334 |
UNSPSC 21.0: | 39122334 |
ECCN: | |
Kraj pochodzenia: | CN |
EAN: | |
Waga: | 0,072 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |