View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
RMO300
Poproś o ofertę
Ifm RMO300
Absolute multiturn encoder with hollow shaft. MULTITURN ENCODER STANDARD LINE
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Absolute position traceability even when unpowered. Bearing operating time measurement for efficient maintenance planning. Freely programmable total resolution up to 31 bits. Programmable digital switching input/output. High shock and vibration resistance thanks to magnetic sensing principle
Parametry techniczne
| Resolution: | 65536 steps; 32768 revolutions; 31 bit |
| Communication interface: | IO-Link |
| Shaft design: | hollow shaft open to one side |
| Shaft diameter [mm]: | 15 |
| Function principle: | absolute |
| Revolution type: | multiturn |
| Operating voltage [V]: | 18...30 DC; (to PELV) |
| Rated insulation voltage [V]: | 30 |
| Current consumption [mA]: | < 75 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Max. power-on delay time [ms]: | 1000 |
| Max. revolution electrical [U/min]: | 12000 |
| Short-circuit protection: | yes |
| Resolution: | 65536 steps; 32768 revolutions; 31 bit |
| Accuracy [°]: | 0.1 |
| Parameter setting options: | preset; zero point; direction of rotation; rotational speed |
| Communication interface: | IO-Link |
| Transmission type: | COM3 (230,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 CDV |
| Profiles: | Identification and Diagnosis; Switching Signal Channel; Measurement Data Channel (high resolution) |
| SIO mode: | no |
| Required master port type: | A |
| Min. process cycle time [ms]: | 2.3 |
| IO-Link process data (cyclical): | function bit length process value 96 device status 4 binary switching information 5 |
| function: | bit length |
| process value: | 96 |
| device status: | 4 |
| binary switching information: | 5 |
| IO-Link functions (acyclical): | application specific tag; operating hours counter; internal temperature; switching cycles counter |
| Supported DeviceIDs: | Type of operation IO-Link device ID Default 1064 d / 0x000428 h |
| Type of operation: | IO-Link device ID |
| Default: | 1064 d / 0x000428 h |
| Note: | For further information please see the IODD PDF file under "Downloads" |
| Ambient temperature [°C]: | -40...85 |
| Storage temperature [°C]: | -40...85 |
| Max. relative air humidity [%]: | 98; (condensation not permissible) |
| Protection: | IP 65; (on the housing: IP 67; on the shaft: IP 64) |
| EMC: | DIN EN 61000-4-2 ESD 4 kV CD DIN EN 61000-4-3 HF radiated 10 V/m DIN EN 61000-4-4 Burst 2 kV DIN EN 61000-4-6 HF conducted 10 V |
| DIN EN 61000-4-2 ESD: | 4 kV CD |
| DIN EN 61000-4-3 HF radiated: | 10 V/m |
| DIN EN 61000-4-4 Burst: | 2 kV |
| DIN EN 61000-4-6 HF conducted: | 10 V |
| Vibration resistance: | DIN EN 60068-2-6 10 g / 10...1000 Hz half-sine |
| DIN EN 60068-2-6: | 10 g / 10...1000 Hz half-sine |
| Shock resistance: | DIN EN 60068-2-27 100 g / 6 ms |
| DIN EN 60068-2-27: | 100 g / 6 ms |
| Continuous shock resistance: | DIN EN 60068-2-29 10 g / 16 ms half-sine |
| DIN EN 60068-2-29: | 10 g / 16 ms half-sine |
| Vibration resistance: | 30 g (10...1000 Hz) |
| MTTF [years]: | 283 |
| Weight [K40]: | 417.2 |
| Dimensions [mm]: | Ø 58 / L = 69 |
| Materials: | flange: aluminium; housing: stainless steel (1.4521 / 444); plug: stainless steel (1.4401 / 316) |
| Max. starting torque [Nm]: | 1 |
| Reference temperature torque [°C]: | 20 |
| Shaft design: | hollow shaft open to one side |
| Shaft diameter [mm]: | 15 |
| Shaft material: | stainless steel |
| Max. shaft load axial (at the shaft end) [N]: | 40 |
| Max. shaft load radial (at the shaft end) [N]: | 110 |
| Installation depth of shaft [mm]: | 28 |
| Max. axial shaft misalignment [mm]: | 0,5 |
| Fixing flange: | clamping flange |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,42 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |