PM1602
Electronic pressure sensor. PM-100-REA01-E-ZVG/US
Robust stainless steel housing for use in the food and beverage industry. Hygienic, flush design. Resistant to high-pressure cleaning with aggressive cleaning agents. High temperature resistance and high protection rating
Output signal: | analogue signal; (configurable) |
Measuring range: | -1...100 bar -15...1450 psi -0.1...10 MPa |
-1...100 bar: | -15...1450 psi |
Process connection: | threaded connection G 1 external thread sealing cone |
Special feature: | Gold-plated contacts |
Measuring element: | ceramic-capacitive pressure measuring cell |
Application: | food and beverage industry |
Media: | viscous media and liquids with suspended particles; liquids and gases; use in gases at pressures > 25 bar only on request |
Medium temperature [°C]: | -25...125; (150 max. 1h) |
Min. bursting pressure: | 650 bar 9425 psi 65 MPa |
650 bar: | 9425 psi |
Pressure rating: | 200 bar 2900 psi 20 Mpa |
200 bar: | 2900 psi |
Vacuum resistance [mbar]: | -1000 |
Type of pressure: | relative pressure; vacuum |
No dead space: | yes |
Operating voltage [V]: | 18...30 DC |
Min. insulation resistance [MΩ]: | 100; (500 V DC) |
Protection class: | III |
Reverse polarity protection: | yes |
Integrated watchdog: | yes |
Current consumption [mA]: | 3.5...21.5 |
Power-on delay time [s]: | 1 |
Current consumption [mA]: | < 45 |
Power-on delay time [s]: | 0.5 |
Number of inputs and outputs: | Number of analogue outputs: 1 |
Total number of outputs: | 1 |
Output signal: | analogue signal; (configurable) |
Number of analogue outputs: | 1 |
Analogue current output [mA]: | 4...20; (scalable) |
Max. load [Ω]: | 700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA) |
Short-circuit proof: | yes |
Overload protection: | yes |
Measuring range: | -1...100 bar -15...1450 psi -0.1...10 MPa |
-1...100 bar: | -15...1450 psi |
Analogue start point: | -1...80 bar -15...1160 psi -0.1...8 MPa |
-1...80 bar: | -15...1160 psi |
Analogue end point: | 19...100 bar 276...1450 psi 1.9...10 MPa |
19...100 bar: | 276...1450 psi |
In steps of: | 0.05 bar 1 psi 0.005 MPa |
0.05 bar: | 1 psi |
Factory setting: | ASP = 0.0 bar AEP = 100.0 bar |
ASP = 0.0 bar: | AEP = 100.0 bar |
Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
Characteristics deviation [% of the span]: | < ± 0,5 (DIN EN 61298-2); (incl. zero point and span error, non-linearity, hysteresis ; Turn down 1:1) |
Linearity deviation [% of the span]: | < ± 0,15; (Turn down 1:1) |
Hysteresis deviation [% of the span]: | < ± 0,15; (Turn down 1:1) |
Long-term stability [% of the span]: | < ± 0,1; (Turn down 1:1; per year) |
Temperature coefficient zero point [% of the span / 10 K]: | < ± 0,2; (0...70 °C) |
Temperature coefficient span [% of the span / 10 K]: | < ± 0,2; (0...70 °C) |
Damping for the analogue output dAA [s]: | 0...4 |
Step response time analogue output [ms]: | 30 |
Step response time analogue output [ms]: | 7 |
Communication interface: | IO-Link |
Transmission type: | COM2 (38,4 kBaud) |
IO-Link revision: | 1.1 |
IO-Link device ID: | 659 d / 00 02 93 h |
Profiles: | Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000) |
SIO mode: | no |
Required master port type: | A |
Process data analogue: | 3 |
Min. process cycle time [ms]: | 3.2 |
Ambient temperature [°C]: | -25...80 |
Storage temperature [°C]: | -40...100 |
Protection: | IP 67; IP 68; IP 69K |
EMC: | DIN EN 61000-6-2 DIN EN 61000-6-3 |
Shock resistance: | DIN EN 60068-2-27 50 g (11 ms) |
DIN EN 60068-2-27: | 50 g (11 ms) |
Vibration resistance: | DIN EN 60068-2-6 20 g (10...2000 Hz) |
DIN EN 60068-2-6: | 20 g (10...2000 Hz) |
MTTF [years]: | 323 |
Note on approval: | factory certificate available as download at www.factory-certificate.ifm |
UL approval: | UL Approval no. J023 |
UL Approval no.: | J023 |
Weight [g]: | 295 |
Materials: | stainless steel (1.4404 / 316L); PBT |
Materials (wetted parts): | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE |
Min. pressure cycles: | 100 million |
Tightening torque [Nm]: | 20 |
Process connection: | threaded connection G 1 external thread sealing cone |
Display unit: | bar; psi; MPa |
Pack quantity: | 1 pcs. |
Connection: | Connector: 1 x M12; Contacts: gold-plated |
ECCN: | |
Kraj pochodzenia: | DE |
EAN: | |
Waga: | 0,34 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |