View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
PM1504
Poproś o ofertę
Ifm PM1504
Electronic pressure sensor. PM-010-REA12-A-ZVG/US
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Robust stainless steel housing for use in the food and beverage industry. Hygienic, flush design. Resistant to high-pressure cleaning with aggressive cleaning agents. High temperature resistance and high protection rating. Integrated temperature measurement via IO-Link
Parametry techniczne
| Output signal: | analogue signal; IO-Link |
| Measuring range: | -1...10 bar -14.5...145 psi -0.1...1 MPa |
| -1...10 bar: | -14.5...145 psi |
| Process connection: | threaded connection G 1/2 external thread sealing cone |
| Special feature: | Gold-plated contacts |
| Measuring element: | ceramic-capacitive pressure measuring cell |
| Application: | food and beverage industry |
| Media: | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C]: | -25...125; (< 1 h: 150) |
| Min. bursting pressure: | 175 bar 2538 psi 17 MPa |
| 175 bar: | 2538 psi |
| Pressure rating: | 75 bar 1100 psi 7.5 Mpa |
| 75 bar: | 1100 psi |
| Vacuum resistance [mbar]: | -1000 |
| Type of pressure: | relative pressure; vacuum |
| No dead space: | yes |
| Operating voltage [V]: | 18...30 DC |
| Min. insulation resistance [MΩ]: | 100; (500 V DC) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Integrated watchdog: | yes |
| Current consumption [mA]: | 3.5...21.5 |
| Power-on delay time [s]: | < 1 |
| Current consumption [mA]: | < 45 |
| Power-on delay time [s]: | < 0.5 |
| Total number of outputs: | 2 |
| Output signal: | analogue signal; IO-Link |
| Analogue current output [mA]: | 4...20; (scalable; 1:5) |
| Max. load [Ω]: | 700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA) |
| Short-circuit proof: | yes |
| Overload protection: | yes |
| Measuring range: | -1...10 bar -14.5...145 psi -0.1...1 MPa |
| -1...10 bar: | -14.5...145 psi |
| Analogue start point: | -1...8 bar -14.5...116 psi -0.1...0.8 MPa |
| -1...8 bar: | -14.5...116 psi |
| Analogue end point: | 1...10 bar 14.5...145 psi 0.1...1 MPa |
| 1...10 bar: | 14.5...145 psi |
| In steps of: | 0.005 bar 0.1 psi 0.0005 MPa |
| 0.005 bar: | 0.1 psi |
| Factory setting: | ASP = 0.0 bar AEP = 10.0 bar |
| ASP = 0.0 bar: | AEP = 10.0 bar |
| Measuring range: | -25...150 °C -13...302 °F |
| -25...150 °C: | -13...302 °F |
| Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span]: | < ± 0,5 (DIN EN 61298-2); (incl. zero point and span error, non-linearity, hysteresis; Turn down 1:1) |
| Linearity deviation [% of the span]: | < ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span]: | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span]: | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K]: | < ± 0,1 (-25...85 °C); < ± 0,3 (85...150 °C) |
| Temperature coefficient span [% of the span / 10 K]: | < ± 0,1 (-25...85 °C); < ± 0,3 (85...150 °C) |
| Accuracy [K]: | ± 2.5 K + (0.045 x (ambient temperature - medium temperature)) |
| Damping for the analogue output dAA [s]: | 0...4 |
| Step response time analogue output [ms]: | 30 |
| Step response time analogue output [ms]: | 7 |
| Dynamic response T05 / T09 [s]: | < 10 / < 25; (DIN EN 60751 water; > 0,9 m/s) |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| IO-Link device ID: | 1021 d / 00 03 fd h |
| Profiles: | Smart Sensor ED2: Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A) |
| SIO mode: | no |
| Required master port type: | A; (when pin 2 not connected: B) |
| Min. process cycle time [ms]: | 4.5 |
| IO-Link resolution pressure [bar]: | 0.002 |
| IO-Link resolution temperature [K]: | 0.2 |
| IO-Link process data (cyclical): | function bit length pressure 16 temperature 16 device status 4 |
| function: | bit length |
| pressure: | 16 |
| temperature: | 16 |
| device status: | 4 |
| IO-Link functions (acyclical): | application specific tag; internal temperature |
| Ambient temperature [°C]: | -25...80 |
| Storage temperature [°C]: | -40...100 |
| Protection: | IP 67; IP 68; IP 69K |
| EMC: | DIN EN 61326-1 |
| Shock resistance: | DIN EN 60068-2-27 50 g (11 ms) |
| DIN EN 60068-2-27: | 50 g (11 ms) |
| Vibration resistance: | DIN EN 60068-2-6 20 g (10...2000 Hz) |
| DIN EN 60068-2-6: | 20 g (10...2000 Hz) |
| MTTF [years]: | 322 |
| Note on approval: | factory certificate available as download at www.factory-certificate.ifm |
| UL approval: | UL Approval no. J024 File number UL E174189 |
| UL Approval no.: | J024 |
| File number UL: | E174189 |
| Weight [g]: | 253 |
| Materials: | stainless steel (1.4404 / 316L); PTFE; FKM |
| Materials (wetted parts): | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PEEK; PTFE |
| Min. pressure cycles: | 100 million |
| Tightening torque [Nm]: | 20 |
| Process connection: | threaded connection G 1/2 external thread sealing cone |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12; Contacts: gold-plated |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,31 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |