View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
IQ2008
Poproś o ofertę
Ifm IQ2008
Inductive sensor with IO-Link. IQ23007BFRKG/IO/2M/PUR
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Setting options PNP/NPN or NO/NC help to reduce storage costs. Long life and robustness thanks to flush installation and a high temperature range. Particularly compact housing for use where space is restricted. Continuous position feedback via IO-Link. Switch points can be easily adapted via IO-Link at any time
Parametry techniczne
| Electrical design: | PNP/NPN; (parameterisable) |
| Output function: | normally open / normally closed; (parameterisable) |
| Communication interface: | IO-Link |
| Housing: | rectangular |
| Dimensions [mm]: | 20 x 8 x 32 |
| Special feature: | Drag chain suitability |
| Operating voltage [V]: | 10...30 DC |
| Current consumption [mA]: | < 30 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Electrical design: | PNP/NPN; (parameterisable) |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2.5 |
| Permanent current rating of switching output DC [mA]: | 100 |
| Switching frequency DC [Hz]: | 300 |
| Short-circuit protection: | yes |
| Overload protection: | yes |
| Switch point IO-Link [mm]: | 1.4...7; (parameterisable) |
| Measuring range IO-Link [mm]: | 0.75...7.5 |
| Correction factor: | steel: 1 / stainless steel: 0.7 / brass: 0.5 / aluminium: 0.4 / copper: 0.3 |
| Hysteresis [% of Sr]: | 3...15 |
| Note on hysteresis: | parameterisable |
| Linearity error IO-Link [%]: | ± 2; (of the final value of the measuring range) |
| Repeatability IO-Link [%]: | ± 1; (of the final value of the measuring range) |
| Temperature coefficient [%/K vom MEW]: | ± 0,6; (-25...70 °C: ± 0,3) |
| Temperature drift [% vom MEW]: | ± 10 |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 CDV |
| Profiles: | Smart Sensor: Identification and diagnosis; Multi-channel, two setpoint switching sensor, type 0 Generic Profiled Sensor; Teach Channel |
| SIO mode: | yes |
| Required master port type: | A |
| Min. process cycle time [ms]: | 3.2 |
| IO-Link process data (cyclical): | function bit length process value 16 device status 4 binary switching information 2 |
| function: | bit length |
| process value: | 16 |
| device status: | 4 |
| binary switching information: | 2 |
| IO-Link functions (acyclical): | application specific tag; operating hours counter |
| Supported DeviceIDs: | Type of operation IO-Link device ID Default 1106 d / 000452 h |
| Type of operation: | IO-Link device ID |
| Default: | 1106 d / 000452 h |
| Note: | For further information please see the IODD PDF file under "Downloads" |
| Ambient temperature [°C]: | -40...85 |
| Protection: | IP 65; IP 66; IP 67; IP 68 |
| EMC: | EN 61000-4-2 ESD 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated 10 V/m EN 61000-4-4 Burst 2 kV EN 61000-4-6 HF conducted 10 V EN 55011 class B |
| EN 61000-4-2 ESD: | 4 kV CD / 8 kV AD |
| EN 61000-4-3 HF radiated: | 10 V/m |
| EN 61000-4-4 Burst: | 2 kV |
| EN 61000-4-6 HF conducted: | 10 V |
| EN 55011: | class B |
| Vibration resistance: | EN 60068-2-6 Fc 20 g (10...3000 Hz) / 50 sweep cycles per frequency; 1 octave per minute in 3 axes |
| EN 60068-2-6 Fc: | 20 g (10...3000 Hz) / 50 sweep cycles per frequency; 1 octave per minute in 3 axes |
| Shock resistance: | EN 60068-2-27 Ea 100 g 11 ms half-sine; 3 shocks each in every direction of the 3 coordinate axes |
| EN 60068-2-27 Ea: | 100 g 11 ms half-sine; 3 shocks each in every direction of the 3 coordinate axes |
| Continuous shock resistance: | EN 60068-2-27 40 g 6 ms; 4000 shocks each in every direction of the 3 coordinate axes |
| EN 60068-2-27: | 40 g 6 ms; 4000 shocks each in every direction of the 3 coordinate axes |
| Fast temperature change: | EN 60068-2-14 Na TA = -40°C; TB = 85°C; t1 = 30 min; t2 = < 10 s 50 cycles |
| EN 60068-2-14 Na: | TA = -40°C; TB = 85°C; t1 = 30 min; t2 = < 10 s 50 cycles |
| MTTF [years]: | 787 |
| UL approval: | Ta -25...70 °C Enclosure type Type 1 voltage supply Limited Voltage/Current UL Approval no. A015 File number UL E174191 |
| Ta: | -25...70 °C |
| Enclosure type: | Type 1 |
| voltage supply: | Limited Voltage/Current |
| UL Approval no.: | A015 |
| File number UL: | E174191 |
| Weight [K40]: | 79.2 |
| Housing: | rectangular |
| Mounting: | flush mountable |
| Dimensions [mm]: | 20 x 8 x 32 |
| Materials: | diecast zinc special coating; sensing face: PBT orange; LED window: TPU; potting: PUR |
| Drag chain suitability: | yes |
| Drag chain suitability: | bending radius for flexible use min. 10 x cable diameter bending cycles > 5 Mio. |
| bending radius for flexible use: | min. 10 x cable diameter |
| bending cycles: | > 5 Mio. |
| Display: | Display operation 1 x LED, green switching status 1 x LED, yellow |
| Display operation: | 1 x LED, green |
| switching status: | 1 x LED, yellow |
| Pack quantity: | 1 pcs. |
| Connection: | Cable: 2 m, PUR, Ø 4.9 mm; 3 x 0.34 mm² |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | RO |
| EAN: | |
| Waga: | 0,08 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |