EL2722
EL2722 | 2-channel triac output terminal
The EL2722 output terminal uses a power switch to control mains voltage from 12 V to 230 V AC. The switching element is a triac, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The steady load capacity of a digital output is 1 A. The EtherCAT Terminal has two independent outputs and indicates its signal state by means of light emitting diodes. The EL2722 has two mutually locked outputs and is very suitable for turning motors (blinds).
Connection technology: | triac output, 2-wire |
Number of outputs: | 2 x make contacts, mutually locked |
Rated load voltage: | 12…230 V AC |
Load type: | ohmic, inductive |
Distributed clocks: | – |
Max. output current: | 1 A (0.5 A if both outputs are on) |
Switching times: | in zero crossing, 0.1…10 ms |
Frequency range: | 47…63 Hz |
Surge voltage protection: | > 275 V |
Peak current: | 40 A (16 ms), 1.5 A (30 s) |
Standby current: | 0.6 mA |
Leakage current (OFF state): | typ. 0.8 mA, max. 1.5 mA |
Switch-on time: | 0.1…10 ms, zero crossing |
Switch-off time: | T/2 |
Max. residual voltage: | 1.5 V (60 mA…1 A), 150 Ω (< 60 mA) |
Current consumption E-bus: | typ. 120 mA |
Electrical isolation: | 500 V (E-bus/field voltage), 3750 V AC (1 min.) |
Current consumption power contacts: | – |
Bit width in the process image: | 2 outputs |
Configuration: | no address or configuration setting |
Special features: | suitable for conventional blind motors |
Weight: | approx. 55 g |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/variable |
Pluggable wiring: | for all ESxxxx terminals |
ECCN: | |
Kraj pochodzenia: | |
EAN: | |
Waga: | 0,00 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |