EK1101
EK1101 | EtherCAT Coupler with ID switch
The EK1101 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1101 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation.
Task within EtherCAT system: | coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks, with identity verification |
Data transfer medium: | Ethernet/EtherCAT cable (min. Cat. 5), shielded |
Distance between stations: | max. 100 m (100BASE-TX) |
Number of EtherCAT Terminals: | up to 65,534 |
Type/number of peripheral signals: | max. 4.2 GB addressable I/O points |
Number of configurable IDs: | 4096 |
Protocol: | EtherCAT |
Delay: | approx. 1 µs |
Data transfer rates: | 100 Mbit/s |
Configuration: | not required |
Bus interface: | 2 x RJ45 |
Power supply: | 24 V DC (-15 %/+20 %) |
Current consumption from US: | 70 mA + (∑ E-bus current/4) |
Current consumption from UP: | load |
Current supply E-bus: | 2000 mA |
Current consumption E-bus: | – |
Power contacts: | max. 24 V DC/max. 10 A |
Electrical isolation: | 500 V (power contact/supply voltage/Ethernet) |
Weight: | approx. 105 g |
Operating/storage temperature: | -25…+60 °C/-40…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/variable |
Approvals/markings: | CE, UL, ATEX, IECEx |
Ex-Marking: | II 3 G Ex nA IIC T4 Gc Ex nA IIC T4 Gc Ex tc IIIC T135 °C Dc |
ECCN: | |
Kraj pochodzenia: | |
EAN: | |
Waga: | 0,00 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |