Pantron
9ISG056
ISG-A103/24VDC
Pantron 9ISG056
ISG-A103/24VDC
ISG-A103, For operation of sensor heads in gate systems with rubber safety edge
Descripción
This device replaces the ISG-A14-100, wich was build in Herberg gate systems. The basic functions are corresponding to the ISG-A114. Switching papameters are optimal adjusted to the operating conditions of rubber safety edges. The layout of the relays contact differ from usual layout and correspond to the ISG-A14-100 (just 1 relay, no TÜV certification). Short start-up time, no test of LED's for immediate availability. Optimised for usual interruption of supply at start-up or direction change in gate systems. Sensor heads are almost pressed in or clued in special plugs at the both ends of the rubber safety edge. For use of these opto sensors in gate systems with rubber safety edge the sensor heads type. P10, or. TSP, are recommended. Single channel opto sensor, for gate systems with rubber safety edge, replaces the ISG-A14-100. Automatic transmit power adjustment, very short start-up time
Descargas
Parámetros técnicos
| Number of channels: | 1 |
| Range (using transmitter itl combined with receiver irl / irh): | 7 m / 15 m (23 ft / 49 ft) |
| Range (using transmitter ith combined with receiver irl / irh): | 10 m / 25 m (33 ft / 82 ft) |
| Range (using transmitter ita combined with receiver irl / irh): | 20 m / 50 m (66 ft / 164 ft) |
| Switching frequency: | 20 hz |
| Power consumption: | 5 va |
| Switching output: | Relay 5 a, 230 v ac |
| Alarm output: | - |
| Test input: | - |
| Connection: | 11-pin din-plug |
| Supply voltage: | 230 v ac / 115 v ac / 24 v ac / 24 v dc |
| Supply voltage: | Order code |
| 230 v ac: | Isg-a103/230vac |
| 115 v ac: | Isg-a103/115vac |
| 24 v ac: | Isg-a103/24vac |
| 24 v dc: | Isg-a103/24vdc |
Parámetros logísticos
| ECCN: | |
| País de origen: | |
| EAN: | |
| Peso: | 0,00 kg |
| Longitud: | 0,00 m |
| Anchura: | 0,00 m |
| Altura: | 0,00 m |