EL2535
EL2535 | 2-channel pulse width current terminals 24 V DC
The EL2535, EL2535-0050 and EL2535-0002 output terminals control the output current via pulse width control of the supply voltage. They are galvanically isolated from the E-bus. The current value 0 up to maximum output current (±1 A, ±50 mA, ±2 A) is specified by the automation device via a 16 bit value. The output stages are protected against overload and short-circuit. The EtherCAT Terminals have two channels that indicate their signal state via light emitting diodes. The LEDs simplify local diagnosis by displaying typical load and wiring faults.
Connection technology: | PWM output, push-pull outputs |
Number of outputs: | 2 |
Nominal voltage: | 24 V DC (-15 %/+20 %) |
Load type: | inductive > 1 mH |
Distributed clocks: | – |
Max. output current: | ±1 A per channel |
Short-circuit current: | typ. < 2 A |
PWM clock frequency: | 30 kHz default |
Duty factor: | 0…100 % (current-controlled) |
Resolution: | 10 bit |
Reverse voltage protection: | yes |
Current consumption E-bus: | typ. 110 mA |
Electrical isolation: | 500 V (E-bus/field potential) |
Current consumption power contacts: | typ. 30 mA + load |
Bit width in the process image: | 48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status |
Special features: | 2 digital 24 V inputs |
Weight: | approx. 50 g |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/see documentation |
Pluggable wiring: | for all ESxxxx terminals |
Approvals/markings: | CE, UL |
Ex-Marking: |
ECCN: | |
País de origen: | |
EAN: | |
Peso: | 0,00 kg |
Longitud: | 0,00 m |
Anchura: | 0,00 m |
Altura: | 0,00 m |