EK1110
EK1110 | EtherCAT extension
Like the E-bus end terminal, the EK1110 EtherCAT extension is connected to the end of the EtherCAT Terminal block. The terminal offers the option of connecting an Ethernet cable with RJ45 connector, thereby extending the EtherCAT strand electrically isolated by up to 100 m. In the EK1110 terminal, the E-bus signals are converted on the fly to 100BASE-TX Ethernet signal representation. Power supply to the EK1110 electronics is via the E-bus. No parameterisation or configuration tasks are required.
Task within EtherCAT system: | conversion of the E-bus signals to 100BASE-TX Ethernet for extension of the EtherCAT network |
Data transfer medium: | Ethernet/EtherCAT cable (min. Cat. 5), shielded |
Distance between stations: | 100 m (100BASE-TX) |
Protocol: | any EtherCAT protocol |
Delay: | approx. 1 µs |
Data transfer rates: | 100 Mbit/s |
Configuration: | not required |
Bus interface: | 1 x RJ45 |
Power supply: | from E-bus |
Current consumption E-bus: | typ. 130 mA |
Electrical isolation: | 500 V (supply voltage/Ethernet) |
Weight: | approx. 50 g |
Operating/storage temperature: | -25…+60 °C/-40…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/variable |
Approvals: | CE, UL, Ex |
ECCN: | |
País de origen: | |
EAN: | |
Peso: | 0,00 kg |
Longitud: | 0,00 m |
Anchura: | 0,00 m |
Altura: | 0,00 m |