2052510000
RCMKIT-I 230VAC 4CO LD/RC
Type: | RCMKIT-I 230VAC 4CO LD/RC |
Order No.: | 2052510000 |
Version: | , Relay module, Number of contacts: 4, CO contact with test button AgNi 90/10, Rated control voltage: 230 V AC, Continuous current: 6 A, Screw connection |
GTIN (EAN): | 4050118412116 |
Qty.: | 10 pc(s). |
Width: | 27.2 mm |
Width (inches): | 1.071 inch |
Height: | 77 mm |
Height (inches): | 3.031 inch |
Depth: | 78.3 mm |
Depth (inches): | 3.083 inch |
Net weight: | 99.9 g |
Humidity: | 40 °C / 93 % rel. humidity, no condensation |
Operating temperature, max.: | 70 °C |
Operating temperature, min.: | -40 °C |
Storage temperature, max.: | 70 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -40 °C...70 °C |
Storage temperature: | -40 °C...70 °C |
REACH SVHC: | Lead 7439-92-1 |
Rated control voltage: | 230 V AC |
Rated current AC: | 4.3 mA |
Power rating: | 1.0 VA |
Coil resistance: | 19465 Ω ± 15 % |
Status indicator: | red LED |
Protective circuit: | RC element |
RC filter: | 4.7 kΩ / 10 nF |
Rated switching voltage: | 240 V AC |
Max. switching voltage, AC: | 240 V |
Continuous current: | 6 A |
Inrush current: | 12 A / 20 ms |
AC switching capacity (resistive), max.: | 1500 VA |
DC switching capacity (resistive), max.: | 144 W @ 24 V |
Switch-on delay: | ≤ 15 ms |
Switch-off delay: | ≤ 10 ms |
Min. switching power: | 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V |
Max. switching frequency at rated load: | 0.1 Hz |
Contact type: | 4 CO contact with test button (AgNi 90/10) |
Rail: | TS 35 |
Test button: | yes (lockable) |
Mechanical switch position indicator: | Yes |
Colour: | black |
Protection degree: | IP20 |
Standards: | DIN EN 50178 |
Certificate No. (DNVGL): | TAA000011A |
Wire connection method: | Screw connection |
Stripping length, rated connection: | 8 mm |
Tightening torque, min.: | 0.5 Nm |
Tightening torque, max.: | 0.7 Nm |
Clamping range, rated connection: | 2.5 mm² |
Clamping range, min.: | 1 mm² |
Clamping range, max.: | 2.5 mm² |
Wire cross-section, solid, min.: | 1 mm² |
Wire cross-section, solid, max.: | 2.5 mm² |
Wire connection cross-section, finely stranded, min.: | 1 mm² |
Wire connection cross section, finely stranded, max.: | 2.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 1 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 1 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 2.5 mm² |
Wire connection cross section, finely stranded, two clampable wires, min.: | 1 mm² |
Wire cross-section, finely stranded, two clampable wires, max.: | 1.5 mm² |
Blade size: | size PZ1 |
Product information: | IP20 without connected conductor at complete opened clamping yoke connection. |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
Type: | RCMKIT-I 230VAC 4CO LD/RC |
Order No.: | 2052510000 |
Version: | , Relay module, Number of contacts: 4, CO contact with test button AgNi 90/10, Rated control voltage: 230 V AC, Continuous current: 6 A, Screw connection |
GTIN (EAN): | 4050118412116 |
Qty.: | 10 pc(s). |
Width: | 27.2 mm |
Width (inches): | 1.071 inch |
Height: | 77 mm |
Height (inches): | 3.031 inch |
Depth: | 78.3 mm |
Depth (inches): | 3.083 inch |
Net weight: | 99.9 g |
Humidity: | 40 °C / 93 % rel. humidity, no condensation |
Operating temperature, max.: | 70 °C |
Operating temperature, min.: | -40 °C |
Storage temperature, max.: | 70 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -40 °C...70 °C |
Storage temperature: | -40 °C...70 °C |
REACH SVHC: | Lead 7439-92-1 |
Rated control voltage: | 230 V AC |
Rated current AC: | 4.3 mA |
Power rating: | 1.0 VA |
Coil resistance: | 19465 Ω ± 15 % |
Status indicator: | red LED |
Protective circuit: | RC element |
RC filter: | 4.7 kΩ / 10 nF |
Rated switching voltage: | 240 V AC |
Max. switching voltage, AC: | 240 V |
Continuous current: | 6 A |
Inrush current: | 12 A / 20 ms |
AC switching capacity (resistive), max.: | 1500 VA |
DC switching capacity (resistive), max.: | 144 W @ 24 V |
Switch-on delay: | ≤ 15 ms |
Switch-off delay: | ≤ 10 ms |
Min. switching power: | 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V |
Max. switching frequency at rated load: | 0.1 Hz |
Contact type: | 4 CO contact with test button (AgNi 90/10) |
Rail: | TS 35 |
Test button: | yes (lockable) |
Mechanical switch position indicator: | Yes |
Colour: | black |
Protection degree: | IP20 |
Standards: | DIN EN 50178 |
Certificate No. (DNVGL): | TAA000011A |
Wire connection method: | Screw connection |
Stripping length, rated connection: | 8 mm |
Tightening torque, min.: | 0.5 Nm |
Tightening torque, max.: | 0.7 Nm |
Clamping range, rated connection: | 2.5 mm² |
Clamping range, min.: | 1 mm² |
Clamping range, max.: | 2.5 mm² |
Wire cross-section, solid, min.: | 1 mm² |
Wire cross-section, solid, max.: | 2.5 mm² |
Wire connection cross-section, finely stranded, min.: | 1 mm² |
Wire connection cross section, finely stranded, max.: | 2.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 1 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 1 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 2.5 mm² |
Wire connection cross section, finely stranded, two clampable wires, min.: | 1 mm² |
Wire cross-section, finely stranded, two clampable wires, max.: | 1.5 mm² |
Blade size: | size PZ1 |
Product information: | IP20 without connected conductor at complete opened clamping yoke connection. |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.106 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |