1398090000
RCMKITP-I 24VDC 4CO AU
Type: | RCMKITP-I 24VDC 4CO AU |
Order No.: | 1398090000 |
Version: | RIDERSERIES, Relay module, Number of contacts: 4, CO contact with test button AgNi 5µm Au, Rated control voltage: 24 V DC, Continuous current: 6 A, PUSH IN |
GTIN (EAN): | 4050118199512 |
Qty.: | 10 pc(s). |
Width: | 28 mm |
Width (inches): | 1.102 inch |
Height: | 98 mm |
Height (inches): | 3.858 inch |
Depth: | 78.3 mm |
Depth (inches): | 3.083 inch |
Net weight: | 96.45 g |
Humidity: | 40 °C / 93 % rel. humidity, no condensation |
Operating temperature, max.: | 70 °C |
Operating temperature, min.: | -40 °C |
Storage temperature, max.: | 70 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -40 °C...70 °C |
Storage temperature: | -40 °C...70 °C |
REACH SVHC: | Lead 7439-92-1 |
Rated control voltage: | 24 V DC |
Rated current DC: | 31.3 mA |
Power rating: | 740 mW |
Pull-in/drop-out voltage, typ.: | 18 V / 2.4 V DC |
Coil resistance: | 777 Ω ± 10 % |
Status indicator: | Green LED |
Protective circuit: | Free-wheeling diode |
Rated switching voltage: | 240 V AC |
Max. switching voltage, AC: | 240 V |
Continuous current: | 6 A |
Inrush current: | 12 A / 20 ms |
AC switching capacity (resistive), max.: | 1500 VA |
DC switching capacity (resistive), max.: | 144 W @ 24 V |
Switch-on delay: | ≤ 15 ms |
Switch-off delay: | ≤ 10 ms |
Min. switching power: | 1 mA @ 1 V |
Max. switching frequency at rated load: | 0.1 Hz |
Contact type: | 4 CO contact with test button (AgNi 5µm Au) |
Rail: | TS 35 |
Test button: | yes (lockable) |
Mechanical switch position indicator: | Yes |
Colour: | black |
Protection degree: | IP20 |
Standards: | DIN EN 50178 |
Certificate No. (DNVGL): | TAA000011A |
Wire connection method: | PUSH IN |
Stripping length, rated connection: | 12 mm |
Clamping range, rated connection: | 1.5 mm² |
Clamping range, min.: | 0.75 mm² |
Clamping range, max.: | 1.5 mm² |
Wire cross-section, solid, min.: | 0.75 mm² |
Wire cross-section, solid, max.: | 1.5 mm² |
Wire connection cross-section, finely stranded, min.: | 0.75 mm² |
Wire connection cross section, finely stranded, max.: | 1.5 mm² |
Wire cross-section, finely stranded, max. (AWG): | AWG 16 |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.75 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 0.75 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.75 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1 mm² |
Blade size: | 0.6 x 3.5 mm |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ROHS: | Conform |
Type: | RCMKITP-I 24VDC 4CO AU |
Order No.: | 1398090000 |
Version: | RIDERSERIES, Relay module, Number of contacts: 4, CO contact with test button AgNi 5µm Au, Rated control voltage: 24 V DC, Continuous current: 6 A, PUSH IN |
GTIN (EAN): | 4050118199512 |
Qty.: | 10 pc(s). |
Width: | 28 mm |
Width (inches): | 1.102 inch |
Height: | 98 mm |
Height (inches): | 3.858 inch |
Depth: | 78.3 mm |
Depth (inches): | 3.083 inch |
Net weight: | 96.45 g |
Humidity: | 40 °C / 93 % rel. humidity, no condensation |
Operating temperature, max.: | 70 °C |
Operating temperature, min.: | -40 °C |
Storage temperature, max.: | 70 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -40 °C...70 °C |
Storage temperature: | -40 °C...70 °C |
REACH SVHC: | Lead 7439-92-1 |
Rated control voltage: | 24 V DC |
Rated current DC: | 31.3 mA |
Power rating: | 740 mW |
Pull-in/drop-out voltage, typ.: | 18 V / 2.4 V DC |
Coil resistance: | 777 Ω ± 10 % |
Status indicator: | Green LED |
Protective circuit: | Free-wheeling diode |
Rated switching voltage: | 240 V AC |
Max. switching voltage, AC: | 240 V |
Continuous current: | 6 A |
Inrush current: | 12 A / 20 ms |
AC switching capacity (resistive), max.: | 1500 VA |
DC switching capacity (resistive), max.: | 144 W @ 24 V |
Switch-on delay: | ≤ 15 ms |
Switch-off delay: | ≤ 10 ms |
Min. switching power: | 1 mA @ 1 V |
Max. switching frequency at rated load: | 0.1 Hz |
Contact type: | 4 CO contact with test button (AgNi 5µm Au) |
Rail: | TS 35 |
Test button: | yes (lockable) |
Mechanical switch position indicator: | Yes |
Colour: | black |
Protection degree: | IP20 |
Standards: | DIN EN 50178 |
Certificate No. (DNVGL): | TAA000011A |
Wire connection method: | PUSH IN |
Stripping length, rated connection: | 12 mm |
Clamping range, rated connection: | 1.5 mm² |
Clamping range, min.: | 0.75 mm² |
Clamping range, max.: | 1.5 mm² |
Wire cross-section, solid, min.: | 0.75 mm² |
Wire cross-section, solid, max.: | 1.5 mm² |
Wire connection cross-section, finely stranded, min.: | 0.75 mm² |
Wire connection cross section, finely stranded, max.: | 1.5 mm² |
Wire cross-section, finely stranded, max. (AWG): | AWG 16 |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.75 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 0.75 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 0.75 mm² |
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 1 mm² |
Blade size: | 0.6 x 3.5 mm |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ROHS: | Conform |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.108 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |