1219990000
DRH174524LT
Type: | DRH174524LT |
Order No.: | 1219990000 |
Version: | D-SERIES DRW / DRH, Relay, Number of contacts: 1, NC contact with blow-out magnet and test button AgSnO2, Rated control voltage: 24 V AC, Continuous current: 16 A, Flat blade connections (4.8 mm x 0.5 mm) |
GTIN (EAN): | 4032248998470 |
Qty.: | 10 pc(s). |
Width: | 36 mm |
Width (inches): | 1.417 inch |
Height: | 36 mm |
Height (inches): | 1.417 inch |
Depth: | 48 mm |
Depth (inches): | 1.89 inch |
Net weight: | 86.3 g |
Humidity: | 35 % to 85 % relative humidity level |
Operating temperature, max.: | 60 °C |
Operating temperature, min.: | -40 °C |
Storage temperature, max.: | 60 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -40 °C...60 °C |
Storage temperature: | -40 °C...60 °C |
REACH SVHC: | Lead 7439-92-1 |
Certificate No. (cURus): | E312083 |
Rated control voltage: | 24 V AC |
Rated current AC: | 101.7 mA |
Power rating: | 2.5 VA |
Coil resistance: | 100 Ω ± 10 % |
Status indicator: | red LED |
Rated switching voltage: | 500 V AC |
Max. switching voltage, AC: | 500 V |
Max. switching voltage, DC: | 300 V |
Continuous current: | 16 A |
Inrush current: | 80 A / 50 ms |
AC switching capacity (resistive), max.: | 8000 VA |
DC switching capacity (resistive), max.: | 2200 W @ 220 V |
Switch-on delay: | < 20 ms |
Switch-off delay: | < 20 ms |
Min. switching power: | 100 mA @ 12 V |
Max. switching frequency at rated load: | 1 Hz |
Contact type: | 1 NC contact with blow-out magnet and test button (AgSnO2) |
Contact resistance: | ≤ 50 mΩ |
Test button: | yes (lockable) |
Mechanical switch position indicator: | Yes |
Colour: | Transparent |
UL 94 flammability rating: | V-2 |
Insulation coordination according to: | EN 61810-1:2008 |
Rated voltage: | 500 V |
Surge voltage category: | III |
Pollution severity: | 3 |
Insulating material group: | IIIa |
Protection degree: | IP20 |
Creepage and clearance distance input – output: | ≥ 8 mm |
Standards: | IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011, UL 508 |
Certificate No. (cURus): | E312083 |
Wire connection method: | Flat blade connections (4.8 mm x 0.5 mm) |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ROHS: | Conform |
Type: | DRH174524LT |
Order No.: | 1219990000 |
Version: | D-SERIES DRW / DRH, Relay, Number of contacts: 1, NC contact with blow-out magnet and test button AgSnO2, Rated control voltage: 24 V AC, Continuous current: 16 A, Flat blade connections (4.8 mm x 0.5 mm) |
GTIN (EAN): | 4032248998470 |
Qty.: | 10 pc(s). |
Width: | 36 mm |
Width (inches): | 1.417 inch |
Height: | 36 mm |
Height (inches): | 1.417 inch |
Depth: | 48 mm |
Depth (inches): | 1.89 inch |
Net weight: | 86.3 g |
Humidity: | 35 % to 85 % relative humidity level |
Operating temperature, max.: | 60 °C |
Operating temperature, min.: | -40 °C |
Storage temperature, max.: | 60 °C |
Storage temperature, min.: | -40 °C |
Operating temperature: | -40 °C...60 °C |
Storage temperature: | -40 °C...60 °C |
REACH SVHC: | Lead 7439-92-1 |
Certificate No. (cURus): | E312083 |
Rated control voltage: | 24 V AC |
Rated current AC: | 101.7 mA |
Power rating: | 2.5 VA |
Coil resistance: | 100 Ω ± 10 % |
Status indicator: | red LED |
Rated switching voltage: | 500 V AC |
Max. switching voltage, AC: | 500 V |
Max. switching voltage, DC: | 300 V |
Continuous current: | 16 A |
Inrush current: | 80 A / 50 ms |
AC switching capacity (resistive), max.: | 8000 VA |
DC switching capacity (resistive), max.: | 2200 W @ 220 V |
Switch-on delay: | < 20 ms |
Switch-off delay: | < 20 ms |
Min. switching power: | 100 mA @ 12 V |
Max. switching frequency at rated load: | 1 Hz |
Contact type: | 1 NC contact with blow-out magnet and test button (AgSnO2) |
Contact resistance: | ≤ 50 mΩ |
Test button: | yes (lockable) |
Mechanical switch position indicator: | Yes |
Colour: | Transparent |
UL 94 flammability rating: | V-2 |
Insulation coordination according to: | EN 61810-1:2008 |
Rated voltage: | 500 V |
Surge voltage category: | III |
Pollution severity: | 3 |
Insulating material group: | IIIa |
Protection degree: | IP20 |
Creepage and clearance distance input – output: | ≥ 8 mm |
Standards: | IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011, UL 508 |
Certificate No. (cURus): | E312083 |
Wire connection method: | Flat blade connections (4.8 mm x 0.5 mm) |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ROHS: | Conform |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.086 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |