1219570000
PWR276110L
Type: | PWR276110L |
Order No.: | 1219570000 |
Version: | D-SERIES PWR, Relay module, Number of contacts: 2, NO contact AgSnO2, Rated control voltage: 110 V DC, Continuous current: 25 A |
GTIN (EAN): | 4032248999064 |
Qty.: | 10 pc(s). |
Width: | 50.5 mm |
Width (inches): | 1.988 inch |
Height: | 34 mm |
Height (inches): | 1.339 inch |
Depth: | 55 mm |
Depth (inches): | 2.165 inch |
Net weight: | 120 g |
Humidity: | 35...85 % rel. humidity, no condensation |
Operating temperature, max.: | 55 °C |
Operating temperature, min.: | -25 °C |
Storage temperature, max.: | 55 °C |
Storage temperature, min.: | -25 °C |
Operating temperature: | -25 °C...55 °C |
Storage temperature: | -25 °C...55 °C |
REACH SVHC: | Lead 7439-92-1 |
Certificate No. (cURus): | E312083 |
Rated control voltage: | 110 V DC |
Rated current DC: | 17.3 mA |
Power rating: | 1.9 W |
Pull-in/drop-out voltage, typ.: | 82.5 V / 16.5 V DC |
Coil resistance: | 6360 Ω ± 10 % |
Status indicator: | Green LED |
Rated switching voltage: | 277 V AC |
Max. switching voltage, AC: | 277 V |
Continuous current: | 25 A |
Inrush current: | 120 A / 50 ms |
AC switching capacity (resistive), max.: | 6900 VA |
DC switching capacity (resistive), max.: | 600 W @ 24 V |
Switch-on delay: | < 30 ms |
Switch-off delay: | < 30 ms |
Min. switching power: | 100 mA @ 12 V |
Max. switching frequency at rated load: | 0.1 Hz |
Contact type: | 2 NO contact (AgSnO2) |
Contact resistance: | ≤ 50 mΩ |
Rail: | TS 35 |
Test button: | No |
Mechanical switch position indicator: | No |
Colour: | beige |
Rated voltage: | 250 V |
Surge voltage category: | III |
Pollution severity: | 3 |
Insulating material group: | IIIa |
Protection degree: | IP10 |
Creepage and clearance distance input – output: | ≥ 5.5 mm |
Impulse withstand voltage: | 6 kV (1.2/50 µs) |
Standards: | IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011, UL 508 |
Certificate No. (cURus): | E312083 |
Wire connection method (control side): | Screw connection |
Min. rated connection clamping range (control side): | 0.5 mm² |
Max. rated connection clamping range (control side): | 2.5 mm² |
Min. tightening torque (control side): | 0.5 Nm |
Max. tightening torque (control side): | 1.2 Nm |
Blade size (control side): | Gr. PH2 |
Wire connection method (load side): | Screw connection |
Min. rated connection clamping range (load side): | 0.5 mm² |
Max. rated connection clamping range (load side): | 4 mm² |
Min. tightening torque (load side): | 0.5 Nm |
Max. tightening torque (load side): | 1.2 Nm |
Blade size (load side): | Gr. PH2 |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ROHS: | Conform |
Type: | PWR276110L |
Order No.: | 1219570000 |
Version: | D-SERIES PWR, Relay module, Number of contacts: 2, NO contact AgSnO2, Rated control voltage: 110 V DC, Continuous current: 25 A |
GTIN (EAN): | 4032248999064 |
Qty.: | 10 pc(s). |
Width: | 50.5 mm |
Width (inches): | 1.988 inch |
Height: | 34 mm |
Height (inches): | 1.339 inch |
Depth: | 55 mm |
Depth (inches): | 2.165 inch |
Net weight: | 120 g |
Humidity: | 35...85 % rel. humidity, no condensation |
Operating temperature, max.: | 55 °C |
Operating temperature, min.: | -25 °C |
Storage temperature, max.: | 55 °C |
Storage temperature, min.: | -25 °C |
Operating temperature: | -25 °C...55 °C |
Storage temperature: | -25 °C...55 °C |
REACH SVHC: | Lead 7439-92-1 |
Certificate No. (cURus): | E312083 |
Rated control voltage: | 110 V DC |
Rated current DC: | 17.3 mA |
Power rating: | 1.9 W |
Pull-in/drop-out voltage, typ.: | 82.5 V / 16.5 V DC |
Coil resistance: | 6360 Ω ± 10 % |
Status indicator: | Green LED |
Rated switching voltage: | 277 V AC |
Max. switching voltage, AC: | 277 V |
Continuous current: | 25 A |
Inrush current: | 120 A / 50 ms |
AC switching capacity (resistive), max.: | 6900 VA |
DC switching capacity (resistive), max.: | 600 W @ 24 V |
Switch-on delay: | < 30 ms |
Switch-off delay: | < 30 ms |
Min. switching power: | 100 mA @ 12 V |
Max. switching frequency at rated load: | 0.1 Hz |
Contact type: | 2 NO contact (AgSnO2) |
Contact resistance: | ≤ 50 mΩ |
Rail: | TS 35 |
Test button: | No |
Mechanical switch position indicator: | No |
Colour: | beige |
Rated voltage: | 250 V |
Surge voltage category: | III |
Pollution severity: | 3 |
Insulating material group: | IIIa |
Protection degree: | IP10 |
Creepage and clearance distance input – output: | ≥ 5.5 mm |
Impulse withstand voltage: | 6 kV (1.2/50 µs) |
Standards: | IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011, UL 508 |
Certificate No. (cURus): | E312083 |
Wire connection method (control side): | Screw connection |
Min. rated connection clamping range (control side): | 0.5 mm² |
Max. rated connection clamping range (control side): | 2.5 mm² |
Min. tightening torque (control side): | 0.5 Nm |
Max. tightening torque (control side): | 1.2 Nm |
Blade size (control side): | Gr. PH2 |
Wire connection method (load side): | Screw connection |
Min. rated connection clamping range (load side): | 0.5 mm² |
Max. rated connection clamping range (load side): | 4 mm² |
Min. tightening torque (load side): | 0.5 Nm |
Max. tightening torque (load side): | 1.2 Nm |
Blade size (load side): | Gr. PH2 |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
eClass 9.0: | 27-37-16-01 |
eClass 9.1: | 27-37-16-01 |
eClass 10.0: | 27-37-16-01 |
ROHS: | Conform |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.128 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |