101192476
ZQ 700-11
Position indicator. Release push button. Thermoplastic enclosure. Large wiring compartment. 1 Cable entry M 20 x 1.5, wire pull and breakage detection. Twisting of towing eye not possible, one-side operation / wire up to 10 m long. One tension force for cable lengths up to 10 m
EAN (European Article Number): | 4030661352664 |
eCl@ss number, Version 9.0: | 27-37-12-01 |
Enclosure material: | Glass-fibre, thermoplastic |
Material of the contacts, electrical: | Silver |
Material of the cover: | Glass-fibre, thermoplastic |
Length of the wire, maximum: | 10 m |
Weight: | 215 g |
Number of auxiliary contacts: | 1 |
Number of safety contacts: | 1 |
Mission Time: | 20 Year(s) |
B10d Normally-closed contact (NC): | 100,000 Operations |
Mechanical life, minimum: | 1,000,000 Operations |
Terminal Connector: | Screw connection |
Note (Cable section): | All indications about the cable section are including the conductor ferrules. |
Width: | 40.5 mm |
Height: | 160 mm |
Depth: | 50.9 mm |
Protection class: | IP 67 to IEC/EN 60529 |
Ambient temperature, minimum: | -25 °C |
Ambient temperature, maximum: | +70 °C |
Relative humidity, maximum: | 95 % |
Rated impulse withstand voltage: | 6 kV |
Thermal test current: | 10 A |
Utilisation category AC-15: | 230 VAC |
Utilisation category AC-15: | 4 A |
Utilisation category DC-13: | 24 VDC |
Utilisation category DC-13: | 4 A |
Switching element: | NO contact, NC contact |
Switching principle: | Snap switch element |
Note (General): | Recommended cable lengths for pull-wire Emergency-Stop switches in relation to the range of ambient temperature. As the thimbles are subject to deformation in case of wire pull, the wire should be pulled several times after fitting. After that, the wire must be re-tensioned using the eyebolt or the tensioner. At 2 m ... 5 m distance intermediate wire supports are required, see accessories |
ECCN: | |
Country of Origin: | BR |
EAN: | |
Weight: | 0.22 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |