IA0344
IAS-30-6.5-N-D6.5-PEEK-Z02-0-1G-1D
Inductive Sensors with ATEX Certificate. Inductive Sensors according to NAMUR EN 60947-5-6 for use in areas with risk of explosion. ATEX Zone 20 (Dust) and 0 (Gas). Both variants are available for flush and non-flush mounting in metal. Different body sizes available from 6.5 mm in diameter up to M32 x 1,5. ATEX Zone 20 Zone 0. Namur
Thread / Process connection: | Ø 6,5 mm |
Housing material active surface: | PEEK (FDA 21 CFR 177.2415) |
Housing material: | PEEK (FDA 21 CFR 177.2415) |
Housing material lid: | PA / PPO |
Electrical version: | 2-Leiter DC |
Permitted residual ripple max.: | 5% |
Frequency of operating cycles max.: | 500 Hz |
Protective circuit: | Eingebaut |
Degree of protection IEC 60529: | IP 67 |
Norm: | EN 60947-5-6 |
Selfinductance (L): | 2 mH |
Selfcapacitance (C): | 250 nF |
Operating current active surface free: | > typ. 2 mA |
Operating current active surface covered: | < typ. 1,5 mA |
Sensing dinstance Sn: | 1,5 mm |
Operating voltage: | 5…15 V DC, Ui = 15 V DC |
Permitted ambient temperature min.: | -20 °C |
Permitted ambient temperature max.: | +70 °C |
Installation: | Bündig |
Output function: | NAMUR |
Cable length: | 2 m |
Connection: | PVC-Kabel, 2 x 0,14 mm² |
CE: | JA |
RoHS: | JA |
ATEX product marking dust: | Ex II 1D Ex ia Ex IIIC T 101°C Da |
ATEX product marking gas: | Ex II 1G Ex ia Ex IIC T1 – T6 Ga |
Certified Zones ATEX: | 1G1D |
IECEX product marking dust: | Ex ia IIIC T101° Da |
IECEX product marking gas: | Ex ia IIC T1 – T6 Ga |
MTTF: | 3664,46 Jahre |
WHG certification: | Auf Anfrage |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |