Article image IA0110

Rechner Sensors IA0110

IAS-10-A13-A-StEx, ATEX

On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"

Description

Inductive Sensors with ATEX Certificate. Inductive sensors for use in areas with risk of explosion: ATEX Zone 20 (Dust) and 1 (Gas). Both variants are available for flush and non-flush mounting in metal. All-in-One – with PNP switching output. No additional Ex-Barrier required. ATEX Zone 20 Zone 1. All in One

Downloads

Technical parameters

Thread / Process connection: M 18 x 1
Housing material active surface: PTFE (FDA 21 CFR 177.1550)
Housing material: Messing
Housing material lid: PA / PPO
Electrical version: 4-Leiter DC
Operating current (Ie): 2 x 0…150 mA
Voltage drop max. (Ud): ≤ 2,5 V
Permitted residual ripple max.: 10%
Noload current (Io): Typ. 15 mA
Frequency of operating cycles max.: 2 kHz
LEDdisplay: Grün / Gelb
Protective circuit: Eingebaut
Degree of protection IEC 60529: IP 67
Norm: EN 60947-5-2
Sensing dinstance Sn: 5 mm
Operating voltage: 10…30 V DC
Permitted ambient temperature min.: -20 °C
Permitted ambient temperature max.: +90 °C
Installation: Bündig
Output function: Antivalent (S + Ö)
Output signal: PNP
Cable length: 2 m
Connection: PVC-Kabel, 5 x 0,14 mm² GNGB
CE: JA
RoHS: JA
ATEX product marking dust: Ex II 1/2 D Ex ta/tb Ex IIIC T101°C Da/Db
ATEX product marking gas: Ex II 2G Ex mb Ex IIC T4 Gb
Certified Zones ATEX: 2G1/2D
IECEX product marking dust: Ex ta/tb IIIC T101°C Da/Db
IECEX product marking gas: Ex mb IIC T4 Gb
MTTF: 1218 Jahre
WHG certification: Auf Anfrage

Logistic parameters

ECCN:
Country of Origin:
EAN:
Weight: 0.00 kg
Length: 0.00 m
Width: 0.00 m
Height: 0.00 m