2910530
PLC-RPT- 24DC/21HC/MS
Utilization restriction: | EMC: class A product, see manufacturer's declaration in the download area |
Width: | 14 mm |
Height: | 80 mm |
Depth: | 104 mm |
Ambient temperature (operation): | -20 °C ... 60 °C |
Ambient temperature (storage/transport): | -20 °C ... 85 °C |
Maximum altitude: | ≤ 2000 m |
Degree of protection: | RT II (Relay) |
Nominal input voltage UN: | 24 V DC |
Typical input current at UN: | 18 mA |
Typical response time: | 10 ms |
Typical release time: | 10 ms |
Coil voltage: | 24 V DC |
Protective circuit: | Reverse polarity protection Polarity protection diode |
Operating voltage display: | Yellow LED |
Contact type: | 1 PDT |
Type of switch contact: | Single contact |
Contact material: | AgNi |
Maximum switching voltage: | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
Minimum switching voltage: | 12 V (10 mA) |
Min. switching current: | 10 mA (at 12 V) |
Maximum inrush current: | 24 A (20 ms) |
Limiting continuous current: | 10 A |
Interrupting rating (ohmic load) max.: | 264 W (24 V DC) |
Switching capacity: | 2 A (24 V, DC13) |
Test voltage relay winding/relay contact: | 4 kVrms (50 Hz, 1 min.) |
Operating mode: | 100% operating factor |
Flammability rating according to UL 94: | V0 (Housing) |
Mechanical service life: | 5x 106 cycles |
Mounting position: | any |
Assembly instructions: | In rows with zero spacing |
Connection name: | Coil side |
Connection method: | Push-in connection |
Stripping length: | 8 mm |
Conductor cross section solid: | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible: | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG: | 26 ... 14 |
Connection name: | Contact side |
Connection method: | Push-in connection |
Stripping length: | 8 mm |
Conductor cross section solid: | 0.14 mm² ... 2.5 mm² |
Conductor cross section flexible: | 0.14 mm² ... 2.5 mm² |
Conductor cross section AWG: | 26 ... 14 |
Designation: | Standards/regulations |
Standards/regulations: | EN 50178 |
Rated insulation voltage: | 250 V AC |
Rated surge voltage: | 6 kV |
Insulation: | Safe isolation, reinforced insulation |
Pollution degree: | 2 |
Overvoltage category: | III |
UL, USA: | UL 508 |
UL, USA/Canada: | cUL 508 |
Designation: | UL, USA |
Identification: | UL 508 |
Designation: | UL, USA/Canada |
Identification: | UL 508 |
China RoHS: | Environmentally Friendly Use Period = 50 years |
eCl@ss 10.0.1: | 27371601 |
eCl@ss 5.0: | 27371600 |
eCl@ss 5.1: | 27371600 |
eCl@ss 6.0: | 27371600 |
eCl@ss 7.0: | 27371601 |
eCl@ss 8.0: | 27371601 |
eCl@ss 9.0: | 27371601 |
ETIM 2.0: | EC001437 |
ETIM 3.0: | EC001437 |
ETIM 4.0: | EC001437 |
ETIM 5.0: | EC001437 |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
UNSPSC 6.01: | 30211916 |
UNSPSC 7.0901: | 39121515 |
UNSPSC 11: | 39121515 |
UNSPSC 12.01: | 39121515 |
UNSPSC 13.2: | 39122334 |
UNSPSC 18.0: | 39122334 |
UNSPSC 19.0: | 39122334 |
UNSPSC 20.0: | 39122334 |
UNSPSC 21.0: | 39122334 |
ECCN: | |
Country of Origin: | DE |
EAN: | |
Weight: | 0.067 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |