1044183
VAL-MS-T1/T2 1000DC-PV/3+V/32
Height: | 89.8 mm |
Width: | 71.2 mm |
Depth: | 65.7 mm (incl. DIN rail 7.5 mm) |
Horizontal pitch: | 4 Div. |
Degree of protection: | IP20 (only when all terminal points are used) |
Ambient temperature (operation): | -40 °C ... 85 °C |
Ambient temperature (storage/transport): | -40 °C ... 85 °C |
Altitude: | ≤ 3000 m (amsl (above mean sea level)) |
Permissible humidity (operation): | 5 % ... 95 % |
Shock (operation): | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation): | 5g (5-500 Hz/2.5 h/XYZ) |
IEC test classification: | PV I / II |
EN type: | T1 / T2 |
SPD failure behavior: | OCM (Open-circuit mode) |
Connection configuration: | Y configuration |
Installation location: | Interior |
Accessibility: | Accessible |
Installation location of the disconnect device: | Internal |
Mode of protection: | (DC+) - (DC-) |
Mounting type: | DIN rail: 35 mm |
Color: | jet black RAL 9005 |
Housing material: | PA 6.6-FR |
Degree of pollution: | 2 |
Distance between live and grounded parts: | 8 mm |
Flammability rating according to UL 94: | V-0 |
Type: | DIN rail module, two-section, divisible |
Surge protection fault message: | optical |
Note: | The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area. |
Maximum continuous operating voltage UCPV: | 1170 V DC |
Short-circuit current rating ISCPV: | 2000 A |
Continuous operating current ICPV: | < 20 µA |
Rated load current IL: | 80 A |
Residual current IPE: | ≤ 40 µA DC |
Standby power consumption PC: | ≤ 25 mVA |
Nominal discharge current (8/20) µs: | 15 kA |
Maximum discharge current Imax (8/20) µs: | 40 kA |
Impulse discharge current (10/350) µs, charge: | 2.5 As |
Impulse discharge current (10/350) µs, specific energy: | 6.25 kJ/Ω |
Impulse discharge current (10/350) µs, peak value limp: | 5 kA |
Total discharge current Itotal (8/20) µs: | 40 kA |
Total discharge current Itotal (10/350) µs: | 10 kA |
Response time tA: | ≤ 25 ns |
Insulation resistance Riso: | > 5 GΩ (at 500 V DC) |
Connection method: | Screw connection |
Screw thread: | M5 |
Tightening torque: | 3 Nm (1.5 mm² ... 16 mm²) |
Stripping length: | 16 mm |
Conductor cross section flexible: | 1.5 mm² ... 25 mm² |
Conductor cross section solid: | 1.5 mm² ... 35 mm² |
Conductor cross section AWG: | 15 ... 2 |
Connection method: | Fork-type cable lug |
Conductor cross section flexible: | 1.5 mm² ... 16 mm² |
Standards/regulations: | EN 50539-11 2013 |
China RoHS: | Environmentally Friendly Use Period = 50 years |
eCl@ss 10.0.1: | 27130802 |
eCl@ss 4.0: | 27130800 |
eCl@ss 4.1: | 27130800 |
eCl@ss 5.0: | 27130800 |
eCl@ss 5.1: | 27130800 |
eCl@ss 6.0: | 27130800 |
eCl@ss 7.0: | 27130802 |
eCl@ss 8.0: | 27130802 |
eCl@ss 9.0: | 27130802 |
ETIM 5.0: | EC000381 |
ETIM 6.0: | EC000381 |
ETIM 7.0: | EC000381 |
ECCN: | |
Country of Origin: | DE |
EAN: | |
Weight: | 0.507 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |