View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Select language
1-Click Quote Request
Product
Pepperl+Fuchs
277763
UC2000-L2-E4-V15
Request a Quote
Pepperl+Fuchs 277763
UC2000-L2-E4-V15
Ultrasonic sensor
On Request. Please send us an email to inquire the price and avaliability.
"ucnguBrctvdgcxgt0eqo"
Description
Single head system, Sensor head bidirectional and rotatable, Function indicators visible from all directions, Quick mounting bracket, Series: -L2, Housing: PA-GF35, Connection type: Connector plug M12 x 1 , 5-pinfa
Technical parameters
| Sensing range: | 60 ... 2000 mm |
| Adjustment range: | 80 ... 2000 mm |
| Dead band: | 0 ... 60 mm |
| Standard target plate: | 100 mm x 100 mm |
| Transducer frequency: | approx. 175 kHz |
| Response delay: | minimum : 60 ms factory setting: 120 ms |
| LED green: | Operating display |
| LED yellow: | switching state |
| LED red: | error |
| Operating voltage: | 10 ... 30 V DC , ripple 10 %SS |
| No-load supply current: | ≤ 50 mA |
| Interface type: | Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit |
| Input/output type: | 1 synchronization connection, bidirectional |
| : 0 Level: | 0 ... 1 V |
| : 1 Level: | 4 V ... UB |
| : Input impedance: | > 12 kΩ |
| : Output rated operating current: | < 12 mA |
| : Pulse length: | 0.5 ... 300 ms (level 1) |
| : Pulse interval: | ≥ 33 ms (level 0) |
| Synchronization frequency: Common mode operation: | ≤ 30 Hz |
| Synchronization frequency: Multiplex operation: | ≤ 33 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ) |
| Input type: | 1 program input |
| Level (switch point 1): | 0 ... 1 V |
| Level (switch point 2): | 4 V ... UB |
| Input impedance: | > 10 kΩ |
| Pulse length: | 2 ... 10 s |
| Output type: | 1 switching output E4, NPN, NO/NC, programmable |
| Rated operating current: | 200 mA , short-circuit/overload protected |
| Voltage drop: | ≤ 2 V |
| Repeat accuracy: | ≤ 0.1 % of full-scale value |
| Switching frequency: | ≤ 5 Hz |
| Range hysteresis: | programmable , preset to 1 mm |
| Temperature influence: | < 1.5 % of full-scale value |
| Standard conformity: Standards: | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 |
| UL approval: | cULus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | Connector plug M12 x 1 , 5-pin |
| Degree of protection: | IP67 |
| Material: Housing: | PA-GF35 |
| Material: Transducer: | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass: | 115 g |
| Output: | near switch point: 80 mm far switch point: 2000 mm output function: Window mode output behavior: NO contact |
| Beam width: | wide |
| Evaluation procedure: | averaging (MxN) M = 5 N = 2 |
| Supplementary information: | Switch settings of the external programming adapter: "output load": pull-up "output logic": inv |
Logistic parameters
| ECCN: | |
| Country of Origin: | Singapur |
| EAN: | 4050143047376 |
| Weight: | 0.13 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |