202070
UB250-F12-EP-V15
Ultrasonic sensor
Single head system, Evaluation limits can be taught-in, Selectable sound lobe width, Synchronization options, Series: -F12, Housing: Frame: nickel plated, die cast zinc,. Laterals: glass-fiber reinforced plastic PC, Connection type: Connector M12 x 1 , 5-pinfa
Sensing range: | 20 ... 250 mm |
Adjustment range: | 25 ... 250 mm |
Dead band: | 0 ... 20 mm |
Standard target plate: | 100 mm x 100 mm |
Transducer frequency: | approx. 400 kHz |
Response delay: | approx. 20 ms |
LED green: | Operating display |
LED yellow: | Evaluation range indicator, Ready for programming |
LED red: | Ready for programming, Fault |
Operating voltage: | 10 ... 30 V DC |
No-load supply current: | ≤ 30 mA |
Synchronization: | 1 synchronous connection, bi-directional 0-level: -UB...+1 V 1-level: +4 V...+UB input impedance: > 12 kΩ synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
Synchronization frequency: Common mode operation: | max. 200 Hz |
Synchronization frequency: Multiplex operation: | ≤ 200/n Hz, n = number of sensors |
Input type: | 1 program input Switching distance 1: -UB ... +1 V, Switching distance 2: +3 V ... +UB Input impedance: > 10 kΩ |
Pulse length: | ≥ 1 s |
Output type: | Push-pull output, short-circuit protected, reverse polarity protected |
Rated operating current: | 200 mA , short-circuit/overload protected |
Default setting: | near switch point: 25 mm far switch point: 250 mm wide sound lobe output function: Window mode output behavior: NO contact |
Voltage drop: | ≤ 3 V |
Repeat accuracy: | ≤ 1 % |
Switching frequency: | 20 Hz |
Range hysteresis: | 1 % of the set operating distance |
Temperature influence: | ± 1.5 % of full-scale value |
UL approval: | cULus Listed, General Purpose |
CSA approval: | cCSAus Listed, General Purpose |
Ambient temperature: | -15 ... 70 °C (5 ... 158 °F) |
Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Connection type: | Connector M12 x 1 , 5-pin |
Degree of protection: | IP54 |
Material: Housing: | Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC |
Material: Transducer: | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
Mass: | 60 g |
ECCN: | |
Country of Origin: | SG |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |