085658
NBB1,5-F41A-E3-V3
Inductive sensor
Series: Rectangular type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: Connector M8 x 1 , 3-pin, Degree of protection: IP67fa
Switching function: | Normally closed (NC) |
Output type: | PNP |
Rated operating distance: | 1.5 mm |
Installation: | flush |
Output polarity: | DC |
Assured operating distance: | 0 ... 1.215 mm |
Reduction factor rAl: | 0.45 |
Reduction factor rCu: | 0.35 |
Reduction factor r304: | 0.75 |
Operating voltage: | 10 ... 30 V DC |
Switching frequency: | 0 ... 1500 Hz |
Hysteresis: | typ. 3 % |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | pulsing |
Voltage drop: | ≤ 3 V |
Operating current: | 0 ... 100 mA |
Off-state current: | 0 ... 0.5 mA typ. |
No-load supply current: | ≤ 15 mA |
Switching state indicator: | LED, yellow |
MTTFd: | 1750 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
UL approval: | cULus Listed, General Purpose |
CSA approval: | cCSAus Listed, General Purpose |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
Connection type: | Connector M8 x 1 , 3-pin |
Housing material: | brass, nickel-plated |
Sensing face: | PBT |
Degree of protection: | IP67 |
Mass: | 13.5 g |
ECCN: | |
Country of Origin: | ID |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |