051324
NBB2-6,5M25-E2-V3
Inductive sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: Connector plug M8 x 1 , 3-pin, Degree of protection: IP67fa
Switching function: | Normally open (NO) |
Output type: | PNP |
Rated operating distance: | 2 mm |
Installation: | flush |
Output polarity: | DC |
Assured operating distance: | 0 ... 1.62 mm |
Actuating element: | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 6.5 mm x 6.5 mm x 1 mm |
Reduction factor rAl: | 0.4 |
Reduction factor rCu: | 0.3 |
Reduction factor r304: | 0.7 |
Reduction factor rBrass: | 0.45 |
Output type: | 3-wire |
Operating voltage: | 5 ... 30 V |
Switching frequency: | 0 ... 6000 Hz |
Hysteresis: | typ. 5% |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | pulsing |
Voltage drop: | ≤ 1.5 V |
Operating current: | 0 ... 100 mA |
Off-state current: | 0 ... 0.2 mA |
No-load supply current: | ≤ 10 mA |
Time delay before availability: | ≤ 100 ms |
Switching state indicator: | Multihole-LED, yellow |
MTTFd: | 960 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
UL approval: | cULus Listed, General Purpose |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Connection type: | Connector plug M8 x 1 , 3-pin |
Housing material: | brass, nickel-plated |
Sensing face: | LCP |
Degree of protection: | IP67 |
ECCN: | |
Country of Origin: | SG |
EAN: | |
Weight: | 0.01 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |