015833
NJ40+U4+E
Inductive sensor
Series: VariKont ®, Housing material: PBT/metal, Output type: 3-wire, Installation: non-flush, Type of voltage: DC, Connection type: screw terminals, Degree of protection: IP68fa
Switching function: | Normally open (NO) |
Output type: | NPN |
Rated operating distance: | 40 mm |
Installation: | non-flush |
Output polarity: | DC |
Assured operating distance: | 0 ... 32.4 mm |
Reduction factor rAl: | 0.5 |
Reduction factor rCu: | 0.45 |
Reduction factor r304: | 0.8 |
Operating voltage: | 10 ... 60 V |
Switching frequency: | 0 ... 100 Hz |
Hysteresis: | 1 ... 10 typ. 5 % |
Reverse polarity protection: | yes |
Short-circuit protection: | yes |
Voltage drop: | ≤ 2.8 V |
Operating current: | 0 ... 200 mA |
No-load supply current: | ≤ 10 mA |
Operating voltage indicator: | LED, green |
Switching state indicator: | LED, yellow |
Standards: | IEC / EN 60947-5-2:2004 |
UL approval: | cULus Listed, General Purpose |
CSA approval: | cCSAus Listed, General Purpose |
CCC approval: | Certified by China Compulsory Certification (CCC) |
Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
Connection type: | screw terminals |
Information for connection: | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
Core cross-section: | up to 2.5 mm2 |
: Minimum core cross-section: | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 |
: Maximum core cross-section: | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 |
Housing material: | PBT/metal |
Sensing face: | PBT |
Degree of protection: | IP68 |
ECCN: | |
Country of Origin: | Indonesien |
EAN: | 4050143001408 |
Weight: | 0.40 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |