Pantron
9ISG252
ISG-N37/115VAC
Pantron 9ISG252
ISG-N37/115VAC
ISG-N37, Single channel opto sensor, manual sensitivity setting, timer, 2 transmit level, light/dark switching, 4 frequencies, alarm output
Description
Single channel amplifier with extended functions. Four frequency settings allow close mounting of adjacent beams. Two power levels for individual range setting. Light/dark switchmode for inverted output signal. Alarm output for detection of decreasing visibility, dust or misalignment. The amplifier provides both transistor and relay output. Single channel opto sensor. Detection range up to 70 m (230 ft). Manual sensitivity setting. Relay output. Transistor output. On/off delay timer. 4 frequency settings. 2 level settings. Light/dark switching. Alarm output
Downloads
Technical parameters
| Number of channels: | 1 |
| Range (using transmitter itl combined with receiver irl / irh): | 20 m / 25 m (66 ft / 82 ft) |
| Range (using transmitter ith combined with receiver irl / irh): | 30 m / 35 m (98 ft / 115 ft) |
| Range (using transmitter ita combined with receiver irl / irh): | 50 m / 70 m (164 ft / 230 ft) |
| Switching frequency: | 18 hz |
| Power consumption: | 5 va |
| Switching delay: | 0...10 s |
| Switching output relay: | Relay change-over contact 5 a, 230 v ac |
| Switching output transistor, dc-supply: | Pnp / npn 100 ma, 30 v dc |
| Switching output transistor, ac-supply: | Npn 30 ma / pnp 5 ma |
| Alarm output, dc-supply: | Pnp/ npn 100 ma, 30 v dc |
| Alarm output, ac-supply: | Npn 30 ma / pnp 5 ma |
| Test input: | - |
| Connection: | 11-pin din-plug |
| Supply voltage: | 230 v ac / 115 v ac / 24 v ac / 24 v dc |
| Supply voltage: | Order code |
| 230 v ac: | Isg-n37/230vac |
| 115 v ac: | Isg-n37/115vac |
| 24 v ac: | Isg-n37/24vac |
| 24 v dc: | Isg-n37/24vdc |
Logistic parameters
| ECCN: | |
| Country of Origin: | |
| EAN: | |
| Weight: | 0.00 kg |
| Length: | 0.00 m |
| Width: | 0.00 m |
| Height: | 0.00 m |