9ISG181
ISG-N128/230VAC
ISG-N128, Single channel opto sensor, manual sensitivity setting, sensor-control, alarm output, relay output
The device ISG-N128 is equipped with microprocessor-based technology. It is equipped with features that normally can only be found in automatic or multiplex amplifiers. Every error caused by transmitter and receiver wiring is reported immediately by the permanent sensor-control. The 4-fold frequency change-over is useful to decouple nearby light barriers. Two level settings allow an adjustment to be made to compensate for distance and for different operating conditions. By the use of dark switching, it is possible to reverse the switching behavior of the output. The alarm output indicates sensor errors as well as decreased visual contact caused by contamination or misalignment. Includes a relay output for high switching loads. Single channel opto sensor. Detection range up to 55 m (180 ft). Manual sensitivity setting. Permanent sensor-control. Relay output. Transistor output NPN. Alarm output. 4 frequency settings. 2 level settings. Light/dark switching
Number of channels: | 1 |
Range (using transmitter itl combined with receiver irl / irh): | 10 m / 20 m (33 ft / 66 ft) |
Range (using transmitter ith combined with receiver irl / irh): | 20 m / 35 m (66 ft / 115 ft) |
Range (using transmitter ita combined with receiver irl / irh): | 35 m / 55 m (115 ft / 180 ft) |
Switching frequencies: | 50 hz /10 hz |
Power consumption: | 5 va |
Switching output: | Relay 5 a, 230 v ac transistor npn 100 ma, 30 v dc |
Alarm output, dc-supply: | Pnp / npn 100 ma, 30 v dc |
Alarm output, ac-supply: | Npn 100 ma, 30 v dc |
Connection: | 11-pin din-plug |
Supply voltage: | 230 v ac / 115 v ac / 24 v ac / 24 v dc |
Supply voltage: | Order code |
230 v ac: | Isg-n128/230vac |
115 v ac: | Isg-n128/115vac |
24 v ac: | Isg-n128/24vac |
24 v dc: | Isg-n128/24vdc |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |