9ISG164
ISG-N124M/24VAC
Measuring amplifier ISG-N124M, Single channel test amplifier for sensor adjustment
The measuring amplifier ISG-N124M is used for testing and adjusting sensors. It is comparable with the functional features of the ISG-N124. It is possible to connect a measuring instrument 0 – 10 V via a connector located on the front which will assist in the determination of optimal visual contact between the transmitter and receiver. Diagnostics are also included for sensor wire breakage and short-circuit. The pin configuration of the ISG-N24M amplifier is compatible with all Pantron single channel opto sensors that use an 11-pin DIN-socket. Single channel test amplifier. Sensor adjustment via analog output 0-10 V DC. Detection range up to 55 m (180 ft). Manual sensitivty setting. Permanent sensor-control. Relay output. Transistor output NPN / PNP. Test input. 2 frequency settings. Analog output voltage 0-10 V / 10-0 V selectable
Number of channels: | 1 |
Range (using transmitter itl combined with receiver irl / irh): | 10 m / 20 m (33 ft / 66 ft) |
Range (using transmitter ith combined with receiver irl / irh): | 20 m / 35 m (66 ft / 115 ft) |
Range (using transmitter ita combined with receiver irl / irh): | 35 m / 55 m (115 ft / 180 ft) |
Switching frequency relay / transistor: | 18 hz / 30 hz |
Power consumption: | 5 va |
Switching output: | Transistor pnp / npn 100 ma, 30 v dc relay change-over contact 5 a, 230 v ac |
Connection: | 11-pin din-plug |
Supply voltage: | 230 v ac / 115 v ac / 24 v ac / 24 v dc |
Supply voltage: | Order code |
230 v ac: | Isg-n124m/230vac |
115 v ac: | Isg-n124m/115vac |
24 v ac: | Isg-n124m/24vac |
24 v dc: | Isg-n124m/24vdc |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |