66576200
MLD535-R3L
MLD535-R3L - Multiple light beam safety device receiver
Series: | MLD 500 |
Device type: | Receiver |
Special version: | Reflective element for laser alignment aid |
Functions: | Contactor monitoring (EDM), selectable, Alternative connection for second muting signal, Muting enable function, Muting-timeout extension, Partial muting, Sequence controlled 2-sensor muting, Start/restart interlock (RES), Timing controlled 4-sensor muting |
Type: | 4, IEC/EN 61496 |
SIL: | 3, IEC 61508 |
SILCL: | 3, IEC/EN 62061 |
Performance Level (PL): | e, EN ISO 13849-1 |
MTTFd: | 204 years, EN ISO 13849-1 |
PFHD: | 6.6E-09 per hour |
Mission time: | 20 years, EN ISO 13849-1 |
Category: | 4, EN ISO 13849 |
Number of beams: | 3 Piece(s) |
Beam spacing: | 400 mm |
Selection of operating mode: | Connection 1, pin 2: +24 V for operating mode 1, 2, 4, Connection 1, pin 2: 0 V for operating mode 3, 5, 6, Connection 1, pin 7: +24 V for operating mode 3, 5, 6, Connection 1, pin 7: 0 V for operating mode 1, 2, 4 |
Protective circuit: | Short circuit protected, Overvoltage protection |
Supply voltage UB: | 24 V, DC, -20 ... 20 % |
Current consumption, max.: | 150 mA, Without external load |
Fuse: | External with max. 3 A |
Number of digital switching inputs: | 4 Piece(s) |
Type: | Digital switching input |
Switching voltage high, min.: | 18.2 V |
Switching voltage low, max.: | 2.5 V |
Switching voltage, typ.: | 23 V |
Voltage type: | DC |
Switching current, max.: | 5 mA |
Number of safety-related switching outputs (OSSDs): | 2 Piece(s) |
Number of digital switching outputs: | 1 Piece(s) |
Type: | Safety-related switching output OSSD |
Switching voltage high, min.: | 18.2 V |
Switching voltage low, max.: | 2.5 V |
Switching voltage, typ.: | 23 V |
Voltage type: | DC |
Current load, max.: | 380 mA |
Load inductivity: | 2,200,000 µH |
Load capacity: | 0.3 µF |
Residual current, max.: | 0.2 mA |
Residual current, typ.: | 0.002 mA |
Voltage drop: | 1 V |
Switching element: | Transistor, PNP |
Switching element: | Transistor, PNP |
Type: | Digital switching output |
Switching voltage high, min.: | 18.2 V |
Switching voltage low, max.: | 2.5 V |
Switching voltage, typ.: | 23 V |
Voltage type: | DC |
Response time: | 50 ms |
Restart delay time: | 100 ms |
Number of connections: | 2 Piece(s) |
Function: | Machine interface |
Type of connection: | Connector |
Thread size: | M12 |
Material: | Metal |
No. of pins: | 8 -pin |
Function: | Local interface |
Type of connection: | Connector |
Thread size: | M12 |
Material: | Metal |
No. of pins: | 8 -pin |
Permissible conductor cross section, typ.: | 0.25 mm² |
Length of connection cable, max.: | 100 m |
Permissible cable resistance to load, max.: | 200 Ω |
Dimension (W x H x L): | 52 mm x 900 mm x 64.7 mm |
Housing material: | Metal, Aluminum |
Lens cover material: | Plastic / PMMA |
Material of end caps: | Diecast zinc |
Net weight: | 2,000 g |
Housing color: | Yellow, RAL 1021 |
Type of fastening: | Swivel mount, Groove mounting |
Type of display: | LED |
Number of LEDs: | 2 Piece(s) |
Ambient temperature, operation: | -30 ... 55 °C |
Ambient temperature, storage: | -40 ... 75 °C |
Relative humidity (non-condensing): | 0 ... 95 % |
Degree of protection: | IP 67 |
Protection class: | III |
Certifications: | c CSA US, c TÜV NRTL US, TÜV Süd |
US patents: | US 6,418,546 B, US 7,741,595 B |
Customs tariff number: | 85365019 |
eCl@ss 8.0: | 27272703 |
eCl@ss 9.0: | 27272703 |
ETIM 5.0: | EC001832 |
ETIM 6.0: | EC001832 |
ECCN: | |
Country of Origin: | Deutschland |
EAN: | |
Weight: | 2.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |