50136463
SET LE46C/4P-M12+BTU46.25
SET LE46C/4P-M12+BTU46.25 - Throughbeam photoelectric sensor receiver set
Series: | 46C |
Operating principle: | Throughbeam principle |
Device type: | Receiver |
Contains: | 1x rod mount, diameter of 12 mm BTU 046M.25-D12, 2x M4 x 25 screw |
Operating range: | 0.5 ... 120 m |
Operating range limit: | 0 ... 150 m |
Protective circuit: | Short circuit protected, Polarity reversal protection, Transient protection |
Supply voltage UB: | 10 ... 30 V, DC, Incl. residual ripple |
Residual ripple: | 0 ... 15 %, From UB |
Open-circuit current: | 0 ... 20 mA |
Number of digital switching outputs: | 2 Piece(s) |
Switching element: | Transistor, PNP |
Switching principle: | Light switching |
Switching element: | Transistor, PNP |
Switching principle: | Dark switching |
Switching frequency: | 500 Hz |
Response time: | 1 ms |
Function: | Voltage supply, Signal OUT |
Type of connection: | Connector |
Thread size: | M12 |
Material: | Plastic |
No. of pins: | 4 -pin |
Dimension (W x H x L): | 20.5 mm x 76.3 mm x 44 mm |
Housing material: | Plastic, PC-PBT |
Lens cover material: | Plastic / PMMA |
Net weight: | 60 g |
Type of fastening: | Via optional mounting device, Through-hole mounting |
Compatibility of materials: | ECOLAB |
Ambient temperature, operation: | -40 ... 60 °C |
Degree of protection: | IP 69K, IP 67 |
Protection class: | III |
Standards applied: | IEC 60947-5-2 |
Customs tariff number: | 85365019 |
eCl@ss 8.0: | 27270901 |
eCl@ss 9.0: | 27270901 |
ETIM 5.0: | EC002716 |
ETIM 6.0: | EC002716 |
ECCN: | |
Country of Origin: | Deutschland |
EAN: | |
Weight: | 0.16 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |