210258
UGUTI 6/70 G6-B5
Ultrasonic Label Sensor
Detection of metallised-, transparent- and paper labels. Intuitive teach-in via membrane keyboard, fine-tuning. High reproducibility. Short response time. Robust metal casing. Large fork opening and fork depth. Remote teach with key-lock function. IO-link parameter with IO-link ON-/OFF-Delay. Multi output (Pin2) stability (factory setting) / label detected. Parallel mode (Pin2) / label detected and IO-link (Pin 4)
Operating principle: | Ultrasonic through beam sensor |
Fork opening: | 6 mm |
Branch length inside: | 70 mm |
Characteristics: | plug connector at the back |
Service voltage: | 18 ... 30 V DC |
No-load current: | < 40 mA |
Sensitivity adjustment: | Remote teach, keys |
Switching output: | Push pull (2x), NO/NC, switchable |
Max. power operating: | 100 mA, (per output) |
Label interspace: | > 2 mm |
Label thickness: | < 5,9 mm |
Interface: | IO-Link, V1.1, COM2 (38,4kBd), Smart Sensor Profile |
Display: | LED: red (insufficient stability), LED yellow (Display output), LED green (status) |
Response time: | 0,25 ms |
Reproducibility: | ± 0,2 mm |
Readiness delay: | 180 ms |
Ambient temperature, operation: | 0 … +60 °C |
Insulation voltage endurance: | 500 V |
Protection class: | IP 67 |
Protection degree: | III, operation on protective low voltage |
Casing material: | Aluminium black anodized |
Connection: | M12, 5-poled |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.18 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |