EL2545
EL2545 | 2-channel pulse width current terminal ±3.5 A, 50 V DC
The EL2545 output terminal controls the output current via pulse width control of the supply voltage. It is galvanically isolated from the E-bus. The current value (0 to ±3.5 A) is specified by the automation device via a 16 bit value. The output stage is protected against overload and short-circuit. The EtherCAT Terminal has two channels that indicate their signal state via light emitting diodes. The LEDs simplify local diagnosis by displaying typical load and wiring faults.
Connection technology: | PWM output, push-pull outputs |
Number of outputs: | 2 |
Nominal voltage: | 8…50 V DC |
Load type: | inductive > 1 mH |
Auxiliary voltage: | 24 V DC via power contacts |
Distributed clocks: | yes |
Max. output current: | ±3.5 A (short-circuit proof, thermal-overload proof) per channel |
Short-circuit current: | typ. < 5 A |
PWM clock frequency: | 32 kHz default |
Duty factor: | 0…100 % (current-controlled) |
Resolution: | 12 bit |
Reverse voltage protection: | yes |
Current consumption E-bus: | typ. 180 mA |
Current consumption auxiliary voltage: | typ. 10 mA |
Electrical isolation: | 500 V (E-bus/field potential) |
Current consumption power contacts: | typ. 50 mA + load |
Bit width in the process image: | 48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status |
Configuration: | no address setting, configuration via the controller |
Special features: | with LVDT feedback |
Weight: | approx. 50 g |
Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/see documentation |
Pluggable wiring: | for all ESxxxx terminals |
Approvals/markings: | CE |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |