EL1512
EL1512 | Up/down counter 24 V DC, 1 kHz
The EL1512 EtherCAT Terminal is an up/down counter. It transmits the counter state to the higher-level automation device in an electrically isolated manner. When it is used as a single-channel up/down counter (32 bit), the pulse is set via the clock input, while the count direction is set via the up/down input. The input can also be used as a gate input for triggering the counter. In two-counter mode, two separate counters (Clock and Clock1 inputs) are available, which can be parameterised as up or down counters. The signal state of the inputs is indicated by light emitting diodes. The EL1512 is particularly suitable for simple counting tasks, e.g. in connection with flow meters.
Connection technology: | 1 x up/down counter, 2 x up or down counter |
Specification: | EN 61131-2, type 1, “0”: < 5 V DC, “1”: > 15 V DC, typ. 5 mA |
Number of counters: | 1 or 2 |
Nominal voltage: | 24 V DC (-15 %/+20 %) |
“0” signal voltage: | -3…+5 V (EN 61131-2, type 1) |
“1” signal voltage: | 15…30 V (EN 61131-2, type 1) |
Input current: | typ. 5 mA (EN 61131-2, type 1) |
Counting frequency: | max. 1 kHz |
Distributed clocks: | – |
Current consumption power contacts: | typ. 14 mA + load |
Current consumption E-bus: | typ. 130 mA |
Counter depth: | 32 bit |
Electrical isolation: | 500 V (E-bus/field potential) |
Configuration: | no address setting, configuration via the EtherCAT master |
Special features: | set counters |
Weight: | approx. 50 g |
Operating/storage temperature: | -25…+60 °C/-40…+85 °C |
Relative humidity: | 95 %, no condensation |
Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos.: | IP 20/variable |
Pluggable wiring: | for all ESxxxx terminals |
Approvals: | CE, UL, Ex |
ECCN: | |
Country of Origin: | |
EAN: | |
Weight: | 0.00 kg |
Length: | 0.00 m |
Width: | 0.00 m |
Height: | 0.00 m |