103025498
AZM201Z-ST-T-1P2PW-A-2965-1
Manual release. Hilfsentriegelung. Kunststoffgehäuse. Intelligent diagnosis. Intelligente Diagnose. Thermoplastic enclosure, max. Länge der Sensorkette 200 m. 3 LEDs to show operating conditions. Max. length of the sensor chain 200 m, für Dreh- und Schiebetüren geeignet. Suitable for hinged and sliding guards. 3 LEDs zur Anzeige der Betriebszustände. Self-monitoring series-wiring of 31 sensors, selbstüberwachte Reihenschaltung von 31 Sensoren. RFID-technology for needs-based protection against, tampering. Bedarfsgerechter Manipulationsschutz durch. RFID-Technologie. Sensor technology permits an offset between, actuator and interlock of ± 5 mm vertically and. 3 mm horizontally. Sensor-Technik erlaubt Versatz von Betätiger und. Zuhaltung von vertikal ± 5 mm und horizontal ± 3, mm
EAN (European Article Number): | 4030661513829 |
eCl@ss number, Version 9.0: | 27-27-26-03 |
general information: | Universal coding |
Enclosure material: | Glass-fibre, reinforced thermoplastic |
Weight: | 610 g |
Time to readiness, maximum: | 4,000 ms |
Duration of risk, maximum: | 200 ms |
Power to lock: | Yes |
Guard locking monitored: | Yes |
Manual release: | Yes |
Short circuit detection: | Yes |
Short-circuit recognition: | Yes |
Idle assignable pushbutton: | Yes |
Freely assignable LED: | Yes |
Safety functions: | Yes |
Integral System Diagnostics, status: | Yes |
Number of safety contacts: | 2 |
Number of Series-wiring of sensors: | 31 |
Performance Level: | e |
Control category: | 4 |
PFH-value: | 1.90 x 10-9 /h |
PFD value: | 1.60 x 10⁻⁴ |
Safety Integrity Level (SIL): | 3 |
Mission Time: | 20 Year(s) |
Performance Level: | d |
Control category: | 2 |
PFH-value: | 1.00 x 10⁻⁸ /h |
PFD value: | 8.90 x 10⁻⁴ |
Safety Integrity Level (SIL): | 2 |
Mission Time: | 20 Year(s) |
Mechanical life, minimum: | 1,000,000 Operations |
Clamping force in accordance with ISO14119 Fzh: | 2,000 N |
Clamping force, maximum Fmax: | 2,600 N |
Latching force: | 30 N |
Actuating speed, maximum: | 0.2 m/s |
Terminal Connector: | Connector M23, 12-pole |
Diameter of the Cable, minimum: | 23 AWG |
Diameter of the Cable, maximum: | 15 AWG |
Height of sensor: | 220 mm |
Length of sensor: | 50 mm |
Width of sensor: | 40 mm |
Protection class: | IP66 to IEC 60529 IP67 to IEC 60529 |
Ambient temperature, minimum: | -25 °C |
Ambient temperature, maximum: | +60 °C |
Storage and transport temperature, minimum: | -25 °C |
Storage and transport temperature, maximum: | +85 °C |
Relative humidity, minimum: | 30 % |
Relative humidity, maximum: | 95 % |
Note (Relative humidity): | non-condensing |
Resistance to vibrations to EN 60068-2-6: | 10 … 150 Hz, amplitude 0.35 mm |
Rated impulse withstand voltage: | 0.8 kV |
Operating voltage, minimum: | 20.4 VDC |
Operating voltage, maximum: | 26.4 VDC |
No-load current: | 600 mA |
Operating current: | 1,200 mA |
Reaction time of actuator, maximum: | 100 ms |
Reaction time of input, maximum: | 0.5 ms |
Switching frequency, approx.: | 1 Hz |
Rated operating current (safety outputs): | 250 mA |
Current leakage: | 0.5 mA |
Operating current (diagnostic output): | 50 mA |
Note (LED switching conditions display): | Operating condition: LED green Error / functional defect: LED red |
PIN 1: | A1 Supply voltage UB |
PIN 2: | X1 Safety input 1 |
PIN 3: | A2 GND |
PIN 4: | Y1 Safety output 1 |
PIN 5: | OUT Diagnostic output |
PIN 6: | X2 Safety input 2 |
PIN 7: | Y2 Safety output 2 |
PIN 8: | IN Solenoid control |
PIN 9: | white LED |
PIN 10: | Key button |
PIN 11: | Key button |
PIN 12: | Not used |
Included in delivery: | Actuators must be ordered separately. Triangular key for AZM 201 |
Note (General): | As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. |
PIN 4: | Y1 Safety output 1 |
PIN 5: | OUT Diagnostic output |
PIN 6: | X2 Safety input 2 |
PIN 7: | Y2 Safety output 2 |
PIN 8: | IN Solenoid control |
PIN 9: | white LED |
PIN 10: | Key button |
PIN 11: | Key button |
PIN 12: | Not used |
Included in delivery: | Actuators must be ordered separately. Triangular key for AZM 201 |
Recommendation (actuator): | AZ/AZM201-B1 AZ/AZM201-B30 |
Note (General): | As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. |
ECCN: | |
Ursprungsland: | DE |
EAN: | |
Gewicht: | 0,61 kg |
Länge: | 0,00 m |
Breite: | 0,00 m |
Höhe: | 0,00 m |