103003607
RSS260-I2-D-ST
Kunststoffgehäuse. 1 x connector plug M8. 1 x Einbaustecker M8. Thermoplastic enclosure. Codierstufe HOCH gemäß ISO 14119. Frontal and lateral actuation enabled, einfache Montage ohne zusätzliche Winkel. Max. 31 sensors can be wired in series., frontale und seitliche Betätigung möglich. Simple mounting without additional angle. Es können maximal 31 Sensoren in Reihe geschaltet, werden. Coding level "High" according to ISO 14119. Bedarfsgerechter Manipulationsschutz durch. RFID-Technologie. Repeated individual coding with RFID technology. Mehrfach anlernbare individuelle Codierung mit. RFID-technology for needs-based protection against, tampering
EAN (European Article Number): | 4030661436432 |
eCl@ss number, Version 9.0: | 27-27-24-03 |
EAN (European Article Number): | 4030661436432 |
eCl@ss Nummer, Version 9.0: | 27-27-24-03 |
Installation conditions (mechanical): | not flush |
Produktname: | RSS260 |
Vorschriften: | IEC 60947-5-3 |
Active area: | Glass-fibre, thermoplastic |
Codierungstufe gemäß ISO 14119: | hoch |
Reaction time, maximum: | 100 ms |
Gehäusebauform: | Quader |
Diagnostic output: | Yes |
Short circuit detection: | Yes |
Short-circuit recognition: | Yes |
Werkstoff der aktiven Flächen: | Kunststoff, Thermoplast |
Cascadable: | Yes |
Integral System Diagnostics, status: | Yes |
Number of LEDs: | 3 |
Diagnoseausgang: | Ja |
Number of fail-safe digital outputs: | 2 |
Querschlusserkennung: | Ja |
Sicherheitsfunktionen: | Ja |
Kaskadierbar: | Ja |
Safety Integrity Level (SIL): | 3 |
Mission Time: | 20 Year(s) |
Actuating panels: | lateral front side |
Anzahl der sicheren digitalen Ausgänge: | 2 |
Ensured switching distance "ON", front: | 10 mm |
Ensured switching distance "ON", side: | 6 mm |
Ensured switching distance "OFF", front: | 18 mm |
PFH-Wert: | 6,80 x 10⁻¹⁰ /h |
Safety Integrity Level (SIL): | 3 |
Gebrauchsdauer: | 20 Jahre |
Betätigungsebene: | seitlich vorderseitig |
Aktive Fläche: | seitlich vorne |
Note: | The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current |
Height of sensor: | 18 mm |
Gesicherter Schaltabstand "EIN" Sao, Seitlich: | 6 mm |
Gesicherter Schaltabstand "AUS" Sar, Front: | 18 mm |
Gesicherter Schaltabstand "AUS" Sar, Seitlich: | 15 mm |
Ambient temperature, minimum: | -25 °C |
Hysterese (Schaltabstand), maximum: | 2 mm |
Wiederholgenauigkeit R: | 0,5 mm |
Storage and transport temperature, maximum: | +85 °C |
Anschluss, Stecker: | Steckverbinder M8 |
Hinweis: | Der Leitungsquerschnitt der weiterführenden Leitung ist bei beiden Anschlussvarianten zu beachten! Leitungslänge und Leitungsquerschnitt verändern den Spannungsabfall in Abhängigkeit zum Ausgangsstrom |
Voltage type: | DC (direct current) |
No-load current: | 100 mA |
Rated operating voltage, minimum: | 20.4 VDC |
Schutzart: | IP65 gemäß IEC/EN 60529 IP67 gemäß IEC/EN 60529 |
Umgebungstemperatur, minimum: | -25 °C |
Required rated short-circuit current to EN 60947-5-1: | 100 A |
Switching frequency, approx.: | 1 Hz |
Current leakage: | 0.5 mA |
Note (LED switching conditions display): | LED yellow: Operating condition LED green: Supply voltage LED red: Fault |
PIN 1: | A1 Ue: White |
PIN 2: | X1 safety input 1: Brown |
PIN 3: | A2 GND: Green |
Verschmutzungsgrad gemäß VDE 0100: | 3 |
PIN 5: | OUT Diagnostic output OUT Grey |
Strom: | Leerlaufstrom I0, typ.: 0.1 A |
Bemessungsbetriebsspannung: | 24 VDC -15% / +10% |
PIN 8: | IN without function: Red |
Bemessungsbetriebsspannung, maximum: | 26.4 VDC |
Bemessungsbetriebsstrom: | 600 mA |
Bedingter Bemessungskurzschlussstrom nach EN 60947-5-1: | 100 A |
Schaltfrequenz, circa: | 1 Hz |
Ausführung: | p-schaltend |
Spannungsfall Ud, maximum: | 1 V |
Reststrom: | 0,5 mA |
Spannung, Gebrauchskategorie DC12: | 24 VDC |
Strom, Gebrauchskategorie DC12: | 0,25 A |
Spannung, Gebrauchskategorie DC13: | 24 VDC |
Strom, Gebrauchskategorie DC13: | 0,25 A |
Ausführung: | p-schaltend |
Spannungsfall Ud, maximum: | 2 V |
Spannung, Gebrauchskategorie DC12: | 24 VDC |
Strom, Gebrauchskategorie DC12: | 0,05 A |
Spannung, Gebrauchskategorie DC13: | 24 VDC |
Strom, Gebrauchskategorie DC13: | 0,05 A |
Störaussendung: | IEC 61000-6-4 |
Störfestigkeit: | IEC 60947-3 |
Hinweis (LED-Zustandsanzeige): | gelbe LED: Betriebszustand grüne LED: Versorgungsspannung rote LED: Fehler |
PIN 1: | A1 Ue: weiß |
PIN 2: | X1 Sicherheitseingang 1: braun |
PIN 3: | A2 GND: grün |
PIN 4: | Y1 Sicherheitsausgang 1: gelb |
PIN 5: | OUT Diagnoseausgang OUT: grau |
PIN 6: | X2 Sicherheitseingang 2: rosa |
PIN 7: | Y2 Sicherheitsausgang 2: blau |
PIN 8: | IN ohne Funktion: rot |
Empfehlung (Betätiger): | RST16-1 RST-U-2 RST260-1 |
Empfehlung Sicherheitsschaltgerät: | PROTECT PSC1 SRB-E-301ST SRB-E-201LC |
ECCN: | |
Ursprungsland: | DE |
EAN: | |
Gewicht: | 0,06 kg |
Länge: | 0,00 m |
Breite: | 0,00 m |
Höhe: | 0,00 m |