3281118
BTH 3,5-F
Number of levels: | 1 |
Number of connections: | 3 |
Nominal cross section: | 4 mm² |
Color: | black |
Insulating material: | PC |
Flammability rating according to UL 94: | V0 |
Rated surge voltage: | 8 kV |
Degree of pollution: | 3 |
Overvoltage category: | III |
Insulating material group: | IIIa |
Maximum power dissipation for nominal condition: | 1.02 W |
Ambient temperature (operation): | -60 °C ... 85 °C |
Ambient temperature (storage/transport): | -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) |
Permissible humidity (storage/transport): | 30 % ... 70 % |
Ambient temperature (assembly): | -5 °C ... 70 °C |
Ambient temperature (actuation): | -5 °C ... 70 °C |
Connection method: | Ring cable lug |
Connection in acc. with standard: | IEC 60947-7-1 |
Maximum load current: | 32 A |
Nominal current IN: | 32 A |
Nominal voltage UN: | 690 V |
Connection method: | Push-in connection |
Connection in acc. with standard: | IEC 60947-7-1 |
Maximum load current: | 32 A (The maximum load current must not be exceeded by the total current of all connected conductors.) |
Nominal current IN: | 32 A |
Nominal voltage UN: | 690 V |
Open side panel: | Yes |
Width: | 12.7 mm |
Length: | 46 mm |
Pitch: | 10 mm |
Height NS 35/7,5: | 38.2 mm |
Height NS 35/15: | 45.7 mm |
Connection method: | Ring cable lug |
Connection in acc. with standard: | IEC 60947-7-1 |
Stripping length: | The stripping length depends on the specification provided by the cable lug manufacturer. |
Cable lug connection according to standard: | DIN 46234:1980-03 |
Min. cross section for cable lug connection: | 0.2 mm² |
Max. cross section for cable lug connection: | 4 mm² |
AWG min: | 24 |
AWG max: | 12 |
Hole diameter, min.: | 4.3 mm |
Cable lug width, max.: | 8.8 mm |
Bolt diameter: | 4 mm |
Screw thread: | M4 |
Tightening torque, min: | 1.4 Nm |
Tightening torque max: | 2 Nm |
Connection in acc. with standard: | JIS 8207-7-1 |
Cable lug connection according to standard: | JIS 8207-7-1 |
Min. cross section for cable lug connection: | 0.5 mm² |
Max. cross section for cable lug connection: | 3.5 mm² |
Hole diameter, min.: | 4.3 mm |
Cable lug width, max.: | 8.8 mm |
Bolt diameter: | 4 mm |
Screw thread: | M4 |
Tightening torque, min: | 1.4 Nm |
Tightening torque max: | 2 Nm |
Nominal cross section: | 3.5 mm² |
Connection method: | Push-in connection |
Connection in acc. with standard: | IEC 60947-7-1 |
Stripping length: | 10 mm ... 12 mm |
Conductor cross section solid min.: | 0.2 mm² |
Conductor cross section solid max.: | 4 mm² |
Conductor cross section AWG min.: | 24 |
Conductor cross section AWG max.: | 12 |
Conductor cross section flexible min.: | 0.2 mm² |
Conductor cross section flexible max.: | 4 mm² |
Min. AWG conductor cross section, flexible: | 24 |
Max. AWG conductor cross section, flexible: | 12 |
Conductor cross section flexible, with ferrule without plastic sleeve min.: | 0.25 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max.: | 2.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve min.: | 0.25 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max.: | 2.5 mm² |
Conductor cross section solid min.: | 0.5 mm² |
Conductor cross section solid max.: | 4 mm² |
Conductor cross section AWG min.: | 20 |
Conductor cross section AWG max.: | 12 |
Conductor cross section flexible, with ferrule with plastic sleeve min.: | 0.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max.: | 2.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve min.: | 0.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max.: | 2.5 mm² |
Connection in acc. with standard: | JIS 8207-7-1 |
Conductor cross section solid min.: | 0.5 mm² |
Conductor cross section solid max.: | 2 mm² |
Conductor cross section flexible min.: | 0.5 mm² |
Conductor cross section flexible max.: | 3.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve min.: | 0.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max.: | 2 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve min.: | 0.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max.: | 2 mm² |
Connection cross sections directly pluggable: | 0.8 mm² 2 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve min.: | 0.5 mm² |
Conductor cross section flexible, with ferrule with plastic sleeve max.: | 2 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve min.: | 0.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve max.: | 2 mm² |
Connection in acc. with standard: | IEC 60947-7-1 |
Flammability rating according to UL 94: | V0 |
China RoHS: | Environmentally friendly use period: unlimited = EFUP-e |
eCl@ss 10.0.1: | 27141120 |
eCl@ss 4.0: | 27141121 |
eCl@ss 4.1: | 27141121 |
eCl@ss 5.0: | 27141120 |
eCl@ss 5.1: | 27141120 |
eCl@ss 6.0: | 27141100 |
eCl@ss 7.0: | 27141120 |
eCl@ss 8.0: | 27141120 |
eCl@ss 9.0: | 27141120 |
ETIM 3.0: | EC000897 |
ETIM 4.0: | EC000897 |
ETIM 5.0: | EC000897 |
ETIM 6.0: | EC000897 |
ETIM 7.0: | EC000897 |
UNSPSC 6.01: | 30211811 |
UNSPSC 7.0901: | 39121410 |
UNSPSC 11: | 39121410 |
UNSPSC 12.01: | 39121410 |
UNSPSC 13.2: | 39121410 |
UNSPSC 18.0: | 39121410 |
UNSPSC 19.0: | 39121410 |
UNSPSC 20.0: | 39121410 |
UNSPSC 21.0: | 39121410 |
ECCN: | |
Ursprungsland: | IN |
EAN: | |
Gewicht: | 0,013 kg |
Länge: | 0,00 m |
Breite: | 0,00 m |
Höhe: | 0,00 m |