2909741
RIF-2-RPT-LDP-24DC/4X21/EX
Utilization restriction: | EMC: class A product, see manufacturer's declaration in the download area |
Width: | 31 mm |
Height: | 96 mm |
Depth: | 75 mm |
Ambient temperature (operation): | -40 °C ... 60 °C |
Ambient temperature (storage/transport): | -40 °C ... 85 °C |
Degree of protection: | IP20 (Relay base) |
Nominal input voltage UN: | 24 V DC |
Input voltage range in reference to UN: | see diagram |
Typical input current at UN: | 42 mA |
Typical response time: | 13 ms |
Typical release time: | 14 ms |
Coil voltage: | 24 V DC |
Protective circuit: | Damping diode |
Operating voltage display: | Yellow LED |
Power dissipation for nominal condition: | 1.01 W |
Contact type: | 4 PDTs |
Type of switch contact: | Single contact |
Contact material: | AgNi |
Maximum switching voltage: | 250 V AC/DC |
Minimum switching voltage: | 5 V (At 24 mA) |
Min. switching current: | 5 mA (at 24 V) |
Maximum inrush current: | 16 A (20 ms, N/O contacts) |
Limiting continuous current: | 6 A (see diagram) |
Interrupting rating (ohmic load) max.: | 144 W (at 24 V DC) |
Switching capacity: | 2 A (at 24 V, DC13) |
Test voltage relay winding/relay contact: | 2.5 kVrms (50 Hz, 1 min.) |
Test voltage relay contact/relay contact: | 2 kVrms (50 Hz, 1 min.) |
Operating mode: | 100% operating factor |
Flammability rating according to UL 94: | V2 (Housing) |
Mechanical service life: | approx. 2x 107 cycles |
Mounting position: | any |
Assembly instructions: | In rows with zero spacing |
Connection name: | Coil side |
Connection method: | Push-in connection |
Stripping length: | 8 mm |
Conductor cross section solid: | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible: | 0.14 mm² ... 1.5 mm² |
Conductor cross section AWG: | 26 ... 16 (solid) |
Connection name: | Contact side |
Connection method: | Push-in connection |
Stripping length: | 8 mm |
Conductor cross section solid: | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible: | 0.14 mm² ... 1.5 mm² |
Conductor cross section AWG: | 26 ... 16 (solid) |
Standards/regulations: | DIN EN 50178 |
Rated insulation voltage: | 250 V AC |
Rated surge voltage: | 2.5 kV |
Insulation: | Basic insulation |
Overvoltage category: | III |
Designation: | Ex zone |
Standards/regulations: | EN/IEC 60079-0 |
ATEX: | II 3G Ex ec nC IIC T4 Gc |
IECEx: | Ex ec nC IIC T4 Gc |
UL, USA/Canada: | Class I, Div. 2, Groups A, B, C, D T4 |
Designation: | ATEX |
Identification: | II 3G Ex ec nC IIC T4 Gc |
Certificate: | IBExU17ATEXB014X |
Designation: | IECEx |
Identification: | Ex ec nC IIC T4 Gc |
Certificate: | IECEx IBE 17.0032X |
Designation: | UL, USA/Canada |
Identification: | Class I, Div. 2, Groups A, B, C, D T4 |
China RoHS: | Environmentally Friendly Use Period = 50 years |
eCl@ss 10.0.1: | 27371601 |
eCl@ss 5.0: | 27371600 |
eCl@ss 5.1: | 27371600 |
eCl@ss 6.0: | 27371600 |
eCl@ss 7.0: | 27371601 |
eCl@ss 8.0: | 27371601 |
eCl@ss 9.0: | 27371601 |
ETIM 2.0: | EC001437 |
ETIM 3.0: | EC001437 |
ETIM 4.0: | EC001437 |
ETIM 5.0: | EC001437 |
ETIM 6.0: | EC001437 |
ETIM 7.0: | EC001437 |
UNSPSC 6.01: | 30211917 |
UNSPSC 7.0901: | 39121516 |
UNSPSC 11: | 39121516 |
UNSPSC 12.01: | 39121516 |
UNSPSC 13.2: | 39122334 |
UNSPSC 18.0: | 39122334 |
UNSPSC 19.0: | 39122334 |
UNSPSC 20.0: | 39122334 |
UNSPSC 21.0: | 39122334 |
ECCN: | |
Ursprungsland: | CN |
EAN: | |
Gewicht: | 0,11 kg |
Länge: | 0,00 m |
Breite: | 0,00 m |
Höhe: | 0,00 m |